ABB DI810 Analog module industrial system controller

Description

Packaging details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.

There are three status displays LEDs on RTAC-01 module. CHA (green) and
CHB (green) LEDs are used to display the status of channels A and B. WD/INIT (yellow
）LED is used to display the status of the module.
When the drive unit configures the module after power on, the WD/INIT is in a luminous state
State.
Installed in an optional slot If the LED remains on after the module is configured, then:
• Configuration failed.
-Start the drive unit again.
• The module has a hardware failure.
-Make sure the 38 pin connector is inserted correctly.
-Contact ABB service representative.
Installed on I/O
On the module adapter • If there is no communication with the drive unit.
-Check that the drive unit is energized.
-Check the module node ID.
-Check whether the optical fiber cable is connected correctly (transmitter to receiver) to
And whether the connector is inserted correctly.
-Check the fiber optic cable for dirt or cracks.
-Make sure the 38 pin connector is inserted correctly.
-Use a new fiber optic cable.
-Contact ABB service representative.