PDD205A0121 ABB Programmable Logic Controller for Distributed Control System

Description

Packaging details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.

Note: Do not change values of AP parameters by the panel (or by
some other means) during the On-Line Mode since these changes
are not displayed on the screen!
If a parameter (or a bit of a parameter) is connected to an input pin of
a block and you click on this input pin (or on any output pin) while
holding down the Shift key, the actual value of this parameter (or this
output pin) is displayed numerically on the screen in real time.
Note: If you have DriveWindow and you have enabled the
simultaneous use of DriveWindow with DriveAP, you can monitor
parameter values graphically with DriveWindow while DriveAP is
running.
The value display can be removed by clicking again (while holding
down the Shift key) on the same pin.
Standard User Interface: The state of the AP program (Running,
Stopped or Edit) in the connected drive is displayed on the screen
and can be changed by menu commands Drive – Start, Drive – Stop
and Drive – Edit.
Advanced User Interface: The state of the currently visible time level
(Running, Stopped or Edit) in the connected drive is displayed on the
screen and can be changed by menu commands Drive – Start This
Time Level, Drive – Stop This Time Level and Drive – Edit This
Time Level.
The states of all time levels can be changed by menu commands
Drive – Start All Time Levels, Drive – Stop All Time Levels and
Drive – Edit All Time Levels.
The status information of the connected drive is displayed on the
screen in real time in the DRIVE STATUS box. The reference value
display can be removed by clicking on it while holding down the Shift
key.
Standard User Interface: The list of all non-AP parameters is
displayed in the list box below the function blocks.
Advanced User Interface: The Parameter Window lists all non-AP
parameters. If you remove this window, you can see it again by
pressing the F2 key (or by menu command Drive – Parameter List –
Display Parameter List).
Current values of all parameters in the parameter list can be read
from the drive by menu command Drive – Parameter List – Upload
Values (the current value of a parameter can be read by single
clicking on this parameter in the list).
You can change the value of a non-AP parameter in the drive by
double clicking on the desired parameter in the list.