CI854AK01 3BSE030220R1 ABB One year warranty for controller driver card

Description

CI854AK01 3BSE030,220R1 uses ordinary terminal block/terminal strip
■ Install the terminal strip/terminal strip into the control cabinet. Use shielded cables to connect each terminal block from the terminal block to the terminal block of the module
Input loop.
■ Connect the shield of each cable to the metal panel terminal strip. CI854AK01 3BSE030220R1 cannot connect shield wire at the template end (cut the template end
Cable shielding and isolation with shrink tube).
■ Shielded cables are used for wiring from field equipment to terminal board, and shielding grounding is only conducted at field equipment end. (Shear
Disconnect the cable shielding layer at the terminal board end and isolate it with shrink tube). Similarly, keep the terminal board and field device end exposed
The cable length should be as short as possible.

Direct connection method
■ CI854AK01 3BSE030220R1 directly connects each field device (sensor, potentiometer, etc.) and template with shielded cable.
■ Connect the cable to the appropriate screw on the module terminal block.
■ Shield grounding is only conducted at the field equipment end to minimize the wires exposed to interference environment. Can’t be in the mold
Connecting shield wire at the board end (cut off the shield layer of the cable at the template end and isolate it with a shrink tube)
TBQC is not recommended for analog quantity template
Due to the requirements of cable shielding, TBQC devices are not recommended for analog quantity templates.
Analog output module wiring
routine
Each output shall be connected to the cable shield grounding at the template end with high-quality shield wire. For more detailed information, refer to
GFK-0898, Series 90-30 PLC I/O Template Specification.
Use common terminal block/terminal strip
■ Install the terminal strip/terminal strip into the control cabinet. CI854AK01 3BSE030220R1 uses shielded cable to connect each terminal of terminal block to module terminal block
Output loop.
■ Only conduct cable shield grounding at the end of the template. Do not connect the shield wire at the terminal board end (cut off the shield layer of the cable at the terminal board end
And isolated with a shrink tube).
■ Shielded cables are used for wiring from field equipment to terminal board, and shielding grounding is only conducted at the terminal board end. (Cut
The cable shielding layer at the field equipment end shall be isolated with shrink tube). Similarly, it is necessary to keep the terminal board and equipment end exposed
The cable (not shielded) shall be as short as possible.
Direct connection method
■ Use shielded cables to directly connect each field device (sensor, potentiometer, etc.) to the template.
■ Connect the cable to the appropriate screw on the module terminal block.
■ Shield grounding is only carried out at the template end to minimize the wires exposed to interference environment. Cannot be on the device side
Connect the shield wire (cut off the shield layer of the cable at the equipment end and isolate it with a shrink tube)
TBQC is not recommended for analog quantity template
Due to the requirements of cable shielding, TBQC devices are not recommended for analog quantity templates

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen