ABB RDCO-01C optical fiber adapter communication board is brand new

Description

RDCO-01C Bus Interface Units IC670GBI002(F) and IC670GBI102A or later support Hot Insertion/Removal

of modules in the I/O Station.

Hot Insertion/Removal means that modules can be removed and replaced while I/O Station power

is applied without affecting the BIU or other modules in the I/O Station. Separate I/O module

power must be switched off to RDCO-01C the module being inserted or removed.

Hot Insertion/Removal requires the use of specific modules and I/O terminal blocks:

RDCO-01C I/O modules having catalog number suffix J or above. These modules have a projecting

alignment tab that fits into a corresponding alignment tab on I/O Terminal Blocks listed below.

Note that modules with this tab can also be installed on older I/O Terminal Blocks that do not

have mating alignment tabs. However, Hot Insertion/Removal are not supported in such an

installation.

I/O Terminal Blocks IC670CHS101, 102, or 103. These I/O Terminal Blocks have projecting

alignment tabs designed to facilitate Hot Insertion/Removal of modules. Modules that are

earlier than revision J cannot be mounted on these terminal blocks.

I/O Terminal Blocks IC670CHS001, 002, and 003, RDCO-01C which lack alignment tabs, do not support

Hot Insertion/Removal of modules. With these terminal blocks, I/O Station power should be

off when installing or removing modules.

Mixing IC670CHS10x terminal blocks with IC670CHS00x terminal blocks in the same I/O

station is not recommended.

Faults Reported During Hot Insertion/Removal

RDCO-01C When using the recommended equipment listed above, Hot Insertion/Removal may cause the

expected fault reports related to the loss of or addition of the module and its I/O circuits. These

faults should be cleared in the normal manner. However, Hot Insertion/Removal of a rev. J or later

module will NOT cause Configuration Mismatch errors that in some types of systems can shut

down the controller.

I/O Module Data During Hot Insertion/Removal

As mentioned, separate I/O module power must be turned off for Hot Insertion/Removal. When the

module is installed and power is reapplied, module data will quickly return to normal. For

intelligent I/O modules, there may be a delay of a few seconds while the module goes through its

powerup sequence.

Hot Insertion/Removal for a Micro Field Processor

A Micro Field Processor that is revision J or later may be removed/inserted as described above.

Note, however, that although the Micro Field Processor will start functioning upon reinstallation,

the MFP’s application program must be reloaded. I/O data controlled by the Micro Field Processor

will be incorrect until that has been done. (The configuration of the Micro Field Processor is not

affected by Hot Insertion/Removal)

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen