BENTLY 3500/44-01-00 4-channel displacement monitor

Description

3500/44-01-00 Selecting the CP Mod button in the Channel Options Dialog Box, allows a

Custom channel configuration to be downloaded to the monitor. Custom

configuration data is stored in a Custom Products Modification File. Custom

Products Modification files follow the naming convention <modification #.mod>.

These files must be located in the \3500\Rackcfg\Mods\ directory. When a CP

Mod file is selected, 3500/44-01-00 a window is displayed which describes the function of the

modification. CP Mod files are available through Bently Nevada’s Custom

Products Division. Contact your local Bently Nevada Sales Representative for

details.

Reference Information

3500/44-01-00 These fields contain information that indicates which module you are configuring.

Channel

The number of the channel being configured (1 through 4).

Slot

The location of the monitor in the 3500 rack (2 through 15).

Rack Type

Identifies the type of Rack Interface Module installed in the rack (Standard or

TMR).

3500/44-01-00 Enable

Direct

Average position, or change in position, of a rotor in the axial direction with

respect to some fixed reference. This value may be displayed in mils or µm.

This proportional value supports both center zero and noncenter zero Full

Scale Ranges.

Gap

The physical distance between the face of a proximity probe tip and the

observed surface. The distance is 3500/44-01-00 expressed in terms of voltage. Standard

polarity convention dictates that a decreasing gap results in an increasing

(less negative) output signal.

Clamp Value

The value that a proportional value goes to when that channel or proportional

value is Bypassed or defeated. The selected value can be between the

minimum and maximum full-scale range values. Only the values available

from the Recorder Outputs, Communication Gateway and Display Interface

Module are clamped to the specified value when the proportional value is

invalid.

Recorder Output

The proportional value of a channel that is sent to the 4 to 20 mA recorder.

The recorder output is proportional to the measured value over the channel

full scale range. An increase in the proportional value that would be indicated

as upscale on a bar graph display results in an increase in the current at the

recorder output. If the channel is bypassed, the output will be clamped to the

selected clamp value or to 2 mA (if the 2 mA clamp is selected).

OK Mode

Latching

If a channel is configured for Latching OK, once the channel has gone not

OK the status stays not OK until a reset is issued. Reset a latched not OK by

using one of the following methods:

– the reset switch on the front of the Rack Interface Module

– the contact on the Rack Interface I/O Module

– the Reset button in the Operator Display Software

– the reset command through the Communication Gateway Module

– the reset command through the Display Interface Module

– the reset command in the Rack Configuration Software

Nonlatching

The OK status of that channel will track the defined OK status of the

transducer.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen