KJ3222X1-BA1 12P2532X122 VE4003S2B3 expansion interface module

Description

Compact Digital Input – 12P2532X122 provides a low cost interface for 16 digital inputs by

eliminating the need for a Pmod. The following input confifigurations are available:

24V, 48V, 125 Isolated Differential or Single Ended (common return). If desired, a

Pmod can be added to individually fuse inputs (with common return) (Table 11-1).

Contact Input – provides an interface for 16 digital contact inputs with common

return. A +48V on-board power supply provides current limited contact wetting

(Table 8-1).

12P2532X122 Compact Contact Input – provides a low cost interface for 16 digital contact inputs

with common return by eliminating the need for a Pmod. A +48V on-board power

supply provides current limited contact wetting (Table 9-1).

Sequence of Events Input – provides an interface for 16 digital inputs with time

tagging information to within 125 µs. An event tagging mask and fifilters to reject

state changes and input chatter are provided along with time synchronization to the

Controller with 1 ms resolution. Several input confifigurations are available

(Table 20-1).

Compact Sequence of Events Input – provides a low cost interface for 16 digital

inputs with time tagging information to within 125 µs. 12P2532X122 An event tagging mask and

fifilters to reject state changes and input chatter is provided along with time

synchronization to the Controller with 1 ms resolution. Several input confifigurations

are available. If desired, a Pmod can be added to individually fuse some digital

inputs (with common return) (Table 21-1).

Digital Output – provides an interface to 16 single ended digital outputs. 5 to 60

VDC loads up to 500 mA each can be controlled. (Total current limited by fuse

rating.) This module can also be used to interface KU, G2R or 12P2532X122 solid state relay

panels for increased switching capability (Table 12-1).

Relay Output – provides an interface to either 12 KU relay or 16 G2R relay outputs.

Special relay bases connect directly to the Ovation I/O branches and house the

Relay Output Electronics module and relays (Table 18-1).

Link Controller – provides a serial RS232, RS422, or RS485 data communications

link to a third party device or system (Table 15-1).

12P2532X122 Loop Interface – provides an interface to the analog and digital I/O needed to

control a single process loop (up to 2 AI, 1 AO, 2 DI, 2 DO). In addition, the loop

interface can display the process information and provide for manual control via a

local operator interface station (SLIM) (Table 16-1).

Pulse Accumulator – counts pulse for up to two input channels and provides the

information to the Controller. The Pulse accumulator may be used to count over a

defifined time period to measure speed (frequency), count until instructed to stop, or

can be used to measure the duration of a pulse (Table 17-7).

Servo Driver – provides an interface to an electro-hydraulic servo actuator (servo

motor) used to control a steam turbine (Table 22-1).

Speed Detector – provides the Controller with frequency measurements of a

sinusoidal or pulse train tachometer. A 16 bit output can be updated at a rate of 5

ms for over-speed detection, and a 32 bit output can be updated at a variable rate for

speed regulation (Table 24-1).

Valve Positioner – provides an interface to an electro-hydraulic servo actuator.

Governor valves, interceptor valves, extraction valves and bypass valves can be

controlled. The module provides closed loop valve positioning control and also

interfaces to a local operator interface station (SLIM) (Table 25-1)

SLIM (Small Loop Interface Module) – contains displays and keyboard inputs

needed for an operator to monitor and control the I/O functions of the Ovation Loop

Interface or Valve Positioner module. The SLIM is located external to the Ovation

I/O cabinet and connected to the Loop Interface or Valve Positioner via cable.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen