Emerson Card OVATION 1C31122G02 Digital Output Module

Description

1C31122G02 This bit configures the module (write) or indicates the configuration

state of the module (read). A “1” indicates that the module is configured.

Note that until the module is configured, reading from addresses 0

through 11 (B in Hex) will produce an attention status.

Bit 1: This bit (write “1”) forces the module into its error state, resulting in the

error LED being lit. The read of bit 1 1C31122G02 indicates that there is an internal

module error, or the Controller has forced the module into the error

state. The state of this bit is always reflected by the module’s Internal Er

ror LED. Whenever this bit is set, 1C31122G02 an attention status is returned to the

Controller when addresses 0 through 11 (B in Hex) are read.

1C31122G02 These bits are “not used” and are read as “0” under normal operation.

Bit 4: This bit (read) indicates that the module is in the “Warming” state. This

state exists after power up and terminates after 8.16 seconds. The mod

ule will be in the error condition during the warm up period.

Bits 5-6: These bits are “not used” and are read as “0” under normal operation.

Bit 7: This bit is the result of a checksum test of 1C31122G02 the EEPROM. A failure of this

test can indicate a bad EEPROM, but typically indicates that the module

has not been calibrated. A “0” indicates that there is no error condition.

If an error is present, the error will be indicated by the module error LED

being lit. The point fault bit will also be set as all the point data is not

calibrated. The “1” state of this bit indicates an unrecoverable error con

dition in the field.

This bit is “not used” and is read as “0” under normal operation.

Bit 11: This bit (write) is used to initiate self-calibration. The sampling rate dur

ing self-calibration will be 2 per second. The status (read) bit is not used

and is read as “0” under normal operation.

Bit 12: This bit is “not used” and is read as “0” under normal operation.

Bit 13: This bit (read) indicates that the module has internal memory error

(FLASH, checksum, Register, or Static RAM error). If this error is

present, the module error LED is lit, the point fault bit will also be set

since the condition of the module is undetermined.

Bit 14: This bit is “not used” and is read as “0” under normal operation.

Bit 15: This bit indicates the point fault status of the module. It is the logical

“OR” of the eight individual point quality statuses plus bits 1, 7, 12, and

13 of this register. A “0” indicates that all eight points have good quality

and no module errors exist.

When bits 1, 4, 7 or 13 of the Status Register are not set, this bit (when set to “1”)

indicates that at least one of the points has bad quality.

A subsequent read of the Point Quality Register at Address 12 (C in Hex) will reveal

the point(s) that have bad quality (see Table 5-4). The Address 12 (C in Hex) Point

Quality Register contains data only when the module fault is due to a bad point

quality.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen