GE IS200EXCSG1ABA sensor board

Description

GE General Electric Technical Specifications: IS200EXCSG1ABA

The 12/24 volt DC Negative Logic 0.5 Amp Output module for the Series 90-30 Programmable

Logic Controller provides 16 output points in two groups. Each group has a common power

output terminal. This output module is designed to have negative logic characteristics in that it

sinks current from the loads to the user common or negative power bus. The output device is

connected between the positive power bus and the module output. The output characteristics

are compatible with a wide range of user-supplied IS200EXCSG1ABA load devices, such as: motor starters,

solenoids, and indicators. Power to operate the field devices must be supplied by the user.

LED indicators which provide the ON/OFF status of each point are located at the top of the

module. This LED block has two horizontal rows with eight green LEDs in each row; the top

row labeled A1 through 8 (points 1 through 8)and the bottom row labeled B1 through 8 (points

9 through 16). An insert goes between the inside and outside surface of the hinged door. The

surface towards the inside of the module (when the hinged door is closed) has circuit wiring

information, and circuit identification information can be recorded on the outside surface. The

outside left edge of the insert is color-coded blue to indicate a low-voltage module. There are

no fuses on this module.

The 12/24 volt DC Positive Logic 1 Amp Electronic Short Circuit Protection (ESCP) Output

module for the Series 90-30 PLC provides 16 output points in two groups of eight with a common

power output terminal for each group. This output module is designed to have positive logic

characteristics in that it sources current to the loads from the user common or positive power bus.

The output device is connected between the negative power bus and the module output. The output

characteristics are compatible with a wide range of user-supplied load devices, such as: motor

starters, solenoids, and indicators. Power to IS200EXCSG1ABA operate the field devices must be supplied by the user.

LED indicators that provide the ON/OFF status of each point are located at the top of the module.

This LED block has two horizontal rows with eight green LEDs in each row with the top row

labeled A1 – A8 (points 1 through 8) and the bottom row labeled B1 – B8 (points 9 through 16). A

red LED (labeled “F”) on the right, centered between the two rows of green LEDs, functions as a

tripped electronic short circuit protection indicator; it turns ON when any short circuit protection

trip occurs. The common signal for each IS200EXCSG1ABA group is monitored electronically. If a short circuit

occurs, the output points in the group turn off and the red LED turns on. The LEDs indicating

output point status will not turn off. This protection does not protect individual outputs from

exceeding their ratings, but will protect the board in case of a short circuited load. To reset

electronic short circuit protection remove the 12/24 VDC user supply to the module. The module

has two electronic short circuit protection circuits; each protects eight outputs – the first circuit

protects A1 – A8, the second circuit protects B1 – B8.

An insert goes between the inside and outside surface of the hinged door. The surface towards the

inside of the module (when the hinged door is closed) has circuit wiring information, and circuit

identification information can be recorded on the outside surface. The outside left edge of the insert

is color-coded blue to indicate a low-voltage module. There are no fuses on this module. This

module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen