GE IS200TBAIH1B TERMINAL MK6 ANALOG BOARD

Description

GE General Electric Technical Specifications: IS200TBAIH1B

The IS200TBAIH1B RMDFSS contains an integral thermal breaker which

will remove AC power should the interior temperature

reach 82° C(180° F). AC power will be restored automatically

when temperature lowers to approximately 55° C (130° F).

Should this occur, check to see that the fan is operating and

the enclosure venting is not obstructed.

DISK DRIVE MAINTENANCE

The disk drives require preventive IS200TBAIH1B maintenance every 12

months under normal usage. See Table 2 for preventive

maintenance procedures. Cleanliness is very important to

successful operation of the RMDFSS. The fan should be

kept clean and free from dirt and lint. Do not lubricate the

disk drive units; oil will allow dust and dirt to accumulate.

The read/write heads on the disk drive units should be

cleaned only when signs of oxide build-up are present.

Oxide build-up will cause premature failure of diskette

material. Occasional inspection of read/write heads and

diskettes will monitor this condition.

The IS200TBAIH1B disk drive units must be removed from the subsystem in

order to inspect them or do preventive maintenance. The

following procedure describes disk drive removal:

1. Disconnect all power from the RMDFSS.

**CAUTION**

High AC voltages are present within the

RMDFSS even with AC switch OFF. Remove

line cord from the wall outlet before servicing.

2. Remove lid (top) of RMDFSS by pulling upward to release

fasteners.

3. Remove P1 (signal), P4 (AC), and PS (DC) connectors

from back of each drive. The IS200TBAIH1B P5 connectors are removed

by depressing the tabs extending from the sides of the

connectors.

4. Carefully remove the front bezel surrounding the disk

drives. A pull from the front will remove the bezel from

the chassis.

5. Remove the front and rear screws (3) that hold the

bracket below the drive. This connects the baseplate to

the disk drive. Note that two screws are visible from the

front. and the third screw is visible from the top ofthe unit

between disk drive and power supply.

6. Remove the disk drive unit(s) out the front of the

enclosure.

7. Lay the drive upside down (on its top) and remove the

four screws that hold the mounting bracket to the drive

frame.

8. Replace the drivels) in reverse order of the above steps.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen