5SHY3545L0020 ABB Drive control thyristor module

Description

.An end-user can make an agreement with the drive’s supplier
so that the supplier acts as the machine builder. However, the
end-user is still responsible for the machine’s safety.
The supplier who acts as the machine builder will issue a Declaration of conformity when the work is complete.
Once an intermediary panel builder incorporates a CDM/BDM
into a panel, he creates a part of a PDS.
The panel builder then has the same responsibilities as the drive’s
manufacturer.
…You have the following responsibilities
1. For the total mechanical and electrical safety of the machine
of which the drive is part of, as specified in the Machinery
Directive.
2. For the electrical safety of the drive as specified in the Low
Voltage Directive.
3. To ensure the drive carries a Declaration of conformity in
accordance with the electrical safety requirements of the Low
Voltage Directive.
4. To be able to demonstrate to the authorities that the machine
to which the drive is being fitted has been built to both the
Machinery Directive and Low Voltage Directive.
5. The manufacturer of the drive is responsible for determining
the EMC behaviour of the drive.
6. The resulting EMC behaviour is the responsibility of the assembler of the final product, by following the manufacturer’s
recommendations and guidelines.