Sale!

ABB DSAI 133A 3BSE018290R1 Directly grounded input board

¥668.00

Part Number:DSAI 133A 3BSE018290R1

DSAI 133A 3BSE018290R1 If there are quality issues, you can help repair them

If there is any need, please contact us and we will reply to you as soon as possible

Category: Tag:
Whatsapp:+86 15359293870
WeChat:+86 18106937731
                E-mail:geabbdcs@gmail.com
Contacts:kelly CHEN

Description

32 channels, directly grounded inputs (single
ended), transducer supply fused channel by
channel, resolution 12 bits unipolar,
0 to + 10 V, 0 to + 5 V, 0 to + 20 mA,
4 to 20 mA (elevated zero obtained by SW)
shunt 250 Ω 0.05%
Adjustment for Boards DSAI 130, DSAI 133 and DSAX 110
The A/D converter is adjusted in three operations:
• Adjustment of zero point Z (automatically adjusted on DSAI 133)
• Adjustment of full scale value G
• Adjustment of symmetry S (only DSAI 130, normally unnecessary).

 


The adjustments are performed in the same order as given here (zero point, full scale value and
symmetry, if relevant).
Adjust AI units which are intended for voltage or current signals with the help of a voltage
reference. If all inputs are jumpered for current, and none are unused so that the solder jumper
can be clipped, you can use a voltage reference which can give at least 20.5 mA for a channel
jumpered for a current shunt.
In this case, set CONV_PAR on the data base element to -20..20 mA, 0..20 mA or
-5..5 V, and half the reference voltage is used instead of the values specified below as an internal
gain multiplied by 2 is used.
An input and corresponding data base element are selected for the adjustment. If an unused
input is selected, ensure that ACT is set to 1 and afterward reset to 0. Select a signal with
CONV_PAR=-10..10 V (exception in accordance with the above) or change CONV_PAR in the
data base element concerned.
Make the updating continuous by setting DEADB=-1 and FILTER_P=0 (note previous values
so that they can be reset after the adjustment).
The reference voltage for the adjustment is connected to the connection unit and the measured
value is read with an engineering station.
The potentiometers Z,G and S are located in the lower half of the front of the board.

 

Details: If you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.
Price issue: If you find that other suppliers offer a cheaper price for the same product, we are also willing to provide you with a reference price and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

 

Stock products of the same series:

DSAI133
DSAX110
ABB DSAI155
ABB DSAI 133A
ABB DSTA 001B
ABB PFBI 161
ABB CI854A
ABB DI840
ABB TU848
ABB WT98
CPM810
ASM810
SAFT 136 CTS
SAFT 100F 380
SAFT 138 CHS
SAFT 170 PAC
SAFT 063F 380
TKAA2136
ABB DATX110
SAFT 160F 380
HIEE405246R0002
SAFT 121 PAC
FDIV8CH
SAMC 19 INF
SAFT 120 PAC
SAFT 171 PAC
DSTA 156B
ABB 07KT97
ABB ACS600
SAFT190APC
SAFT 187 CON
SAFT 168 PAC
SAFT 192 POW
IOD86-TR
AI086-8/4
SAFT185TBC
ABB GKKAC7689