Description

Disable Front Communication Port of RIM

This option disables all write functions through the front communication port on the

Rack Interface Module when selected. When in this mode the Rear

Communication Port is still active.

Drive Rack NOT OK Relay if Rack Address is Changed to Run Mode

When selected, this option will force the NOT OK Relay into a NOT OK state if the

Rack Address is changed at any time while the key switch is in the run position.

Drive Rack NOT OK Relay if a Module is Removed From the Rack

When selected, this option will force the NOT OK Relay into a NOT OK state if any

module is removed from its slot in the Rack.

Drive Rack NOT OK Relay if Key Switch is Changed From Run to Program

Mode

When selected, this option will force the Rack NOT OK Relay into a NOT OK state

any time that the key switch is changed from Run to Program mode.

Switches

Switches let you control the operation of the 3500 rack and control access to the

configuration of the rack. This section lists the software and hardware switches

that are available for the Rack Interface Module.

brand	Product Name	Product model	Order No
BENTLY	modular	126632-01	nothing
Place of Origin	Marketable land	Imported or not	defects liability period
Europe and America	Nationwide and overseas	yes	a year
Place of shipment	Delivery method	How to use	Applicable industries
Xiamen	Shunfeng Express	Commissioning and installation	Power Plant Steel Plant Cement Plant Shipboard Papermaking
Service advantages	Foreign import, goods preparation and supply	Reasonable price and reliable quality	Pictures are for reference only
Product features	Primary source of goods, supply by model	After sales guarantee	Chen 1810693-7731

The Rack Interface Module supports one software module switch – Configuration

Mode. The switch lets you temporarily inhibit monitor and channel functions. This

switch can be set on the Software Switches screen under the Utilities Option on

the main screen of the Rack Configuration Software.

No changes will take effect until the Set button is pressed.

Module Switch

Configuration Mode

This switch allows the rack to be configured. To set the rack in configuration

mode, enable (⌧) this switch and set the key switch on the front of the Rack

Interface Module in the PROGRAM position. When the Rack Configuration

Software downloads a Rack Interface Module configuration, it will will

automatically enable and disable this switch. If the connection to the rack is

lost during the configuration process, use this switch to remove the module

from Configuration Mode.

The module switch number is used in the Communication Gateway Module.

The Rack Interface Module has three hardware switches that are located on the

front panel.

Key Switch

The Key Switch is used to prevent unauthorized changes to the configuration

settings. When the switch is in the RUN position, the 3500 rack cannot be

configured. When the switch is in the PROGRAM position, the 3500 rack can be

configured and the rack continues to operate normally. By removing the key, you

can lock the Rack Interface Module in the RUN or PROGRAM position.

Rack Reset

See Rack Trip Multiply and Reset.

Rack Address

The host computer uses the Rack Address to identify 3500 racks that are linked in

a daisy chain. Set the rack address by using a 6-position DIP switch which

provides for 63 possible addresses. All racks in a daisy chain must have a unique

rack address. The following diagram and table show how to select the address

110001 (49 decimal).

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

Bently Nevada 126632-01 3500 Rack Interface Module

Description

Related products