3500/15 125840-01 Bently Nevada 3500 Rack Save Module Configuration

Description

When performed properly, this module may be installed into or removed from the

rack while power is applied to the rack. 3500/15 125840-01 Refer to the Rack Installation and

Maintenance Manual (part number 129766-01) for the proper procedure.

This section shows how to verify that the Communication Gateway Module is

operating correctly.

Comm Gateway Port Test Utility

Use the Communication (Comm.) Gateway Port Test Utility to verify that the Port

1 HOST connector and the Port 2 HOST connector on the Communication

Gateway RS-232/422 I/O Module are operating properly. Before running the

Communication Gateway Port Test Utility, connect cable 130419-01 (RS-232

Host to 3500/92) between the HOST connector on the Communication Gateway

I/O Module and the computer that has the utility installed.

Refer to the 3500 Monitoring System Rack Configuration and Utilities Guide (part

number 129777-01) for more information about this utility.

Occasionally it may be necessary to replace the original firmware that is shipped

with the 3500/92 Communication Gateway Module. The following instructions

describe how to remove the existing firmware and replace it with upgrade

firmware. The Monitor will need to be reconfigured using the 3500 Rack

Configuration software after having its firmware upgraded.

The following items will be required to perform a firmware upgrade to the

Communications Gateway:

Large Flathead Screwdriver.

Grounding Wrist Strap.*

Small Flathead Screwdriver

Upgrade Firmware ICs.*

*Refer to Section 8(Ordering Information) for part numbers. Users may use their

own grounding wrist strap or IC removal tool.

The following steps will need to be followed to complete the Communication

Gateway Module firmware upgrade:

Ensure that the Module’s configuration is saved using the 3500 Rack

Configuration software.

Refer to Section 1.2 (Handling and Storing Considerations) before handling

the monitor or the upgrade firmware IC.

Remove the monitor from the 3500 rack.

Remove the Top Shield from the monitor.

Remove the two original firmware ICs from the monitor PWA.

Install the two upgrade firmware ICs into the sockets on the monitor PWA.

Replace the monitor Top Shield.

Replace the monitor into the 3500 system.

Reconfigure the monitor using the 3500 Rack Configuration software.

Detailed instructions for some of the steps listed above are provided on the

following pages. Please review completely before proceeding.

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

135785-01 3500/93 Display Unit, non backlighted
135785-02 3500/93 Display Unit, back-lighted
137412-01 3500/93 Manual
135799-01 3500/93 Display Interface Module
135799-02 3500/93 Display Interface Module
(use with A05 option only)
135813-01 3500/93 Display Interface I/O
Module
136634-0010-01 10 Foot (3 metres) Cable (PVC)
136634-0050-01 50 Foot (15 metres) Cable (PVC)
136634-0050-02 50 Foot (15 metres) Cable
(Teflon? )
136634-0100-01 100 Foot (30 metres) Cable (PVC)
136634-0100-02 100 Foot (30 metres) Cable
(Teflon? )
130121-02-01 500 Foot (152 metres) Extension
Cable (PVC)
130121-02-02 500 Foot (152 metres) Extension
Cable (Teflon? )
02200271 External Power Supply for 115 Vac
02200272 External Power Supply for 230 Vac
138227-01 Cable Adapter
146085-01 Power Cable
137224-01 System Mounting Assembly
(sheet metal for A01 & A05
options)
04309007 4-40 X 0.63 Phillips head screw for
System Mounting Assembly, 4 are
required