Bently Nevada 3500/45 140072-04 Proximitor output monitor

Description

All equipment 3500/45 140072-04 should be removed from shipping containers and visually inspected to ensure there is no shipping damage. If shipping damage is apparent, file a claim with the carrier and submit a copy to Bently Nevada Corporation. Include part and serial numbers on all correspondence. If no damage is apparent and the equipment is not going to be used immediately, Bently Nevada Corporation recommends returning the equipment to the shipping container and resealing.

The 3500/45 140072-04 equipment should be stored in an environment free from potentially damaging conditions such as high temperature, excessive humidity, or a corrosive atmosphere. See Appendix B for
environmental specifications. The equipment is durable; however, reasonable handling care should be exercised during installation. When cable connectors are part of the equipment, they must be properly protected from physical abuse or contamination by oil, water, or other substances by wrapping them with FEP tape or another connection protective device.

3500/45 140072-04 Bently Nevada probes and Proximitors are calibrated to AISI E4140 series steel. Most AISI 1000 and AISI 4000 Series steel present a response curve similar to the AISI E4140 Series steel. However, copper, aluminum, brass, tungsten, or other types of metals present a different response curve. If the metal to be observed has significantly different magnetic and electrical properties than AISI E4140 steel, follow the recalibration procedure in Section 3. If it is necessary for the probe to observe a plated area, contact the nearest Bently Nevada Corporation office for assistance. Proper installation requires the observed surface to be free of irregularities such as hammer marks,
scratches, holes, or keyways. Any type of plating (including chrome) normally results in a nonuniform plating thickness. Residual magnetism, surface irregularities, and other conditions in the observed surface can cause electrical or mechanical runout which will introduce error in the Proximitor output.

The various techniques for eliminating electrical and mechanical runout are described in several papers available from Bently Nevada Corporation, including:
• Dealing with “Glitch”. Where does Electronic Vectorial Runout Compensation Fit In? (Application Note 004)
• “Glitch”: Definition of and Methods for Correction, including Shaft Burnishing to Remove Electrical Runout. (Application Note 011)
The electromagnetic fields of probe tips mounted too closely together will cross-couple, causing a small amplitude ac signal to be superimposed on the Proximitor outputs.

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

135785-01 3500/93 Display Unit, non backlighted
135785-02 3500/93 Display Unit, back-lighted
137412-01 3500/93 Manual
135799-01 3500/93 Display Interface Module
135799-02 3500/93 Display Interface Module
(use with A05 option only)
135813-01 3500/93 Display Interface I/O
Module
136634-0010-01 10 Foot (3 metres) Cable (PVC)
136634-0050-01 50 Foot (15 metres) Cable (PVC)
136634-0050-02 50 Foot (15 metres) Cable
(Teflon? )
136634-0100-01 100 Foot (30 metres) Cable (PVC)
136634-0100-02 100 Foot (30 metres) Cable
(Teflon? )
130121-02-01 500 Foot (152 metres) Extension
Cable (PVC)
130121-02-02 500 Foot (152 metres) Extension
Cable (Teflon? )
02200271 External Power Supply for 115 Vac
02200272 External Power Supply for 230 Vac
138227-01 Cable Adapter
146085-01 Power Cable
137224-01 System Mounting Assembly
(sheet metal for A01 & A05
options)
04309007 4-40 X 0.63 Phillips head screw for
System Mounting Assembly, 4 are
required