Description
This parameter specifies the maximum velocity the FX Drive will accelerate to during the index. If the acceleration time, deceleration time and distance are very short, the motor may not reach the maximum velocity; however, the commanded position will be achieved.
For example, if you are setting up an FX-316 with a DXE-316 motor, the motors maximum velocity is 4,000 RPM. In the index screen you enter a maximum velocity of 1,800 RPM and a decel time of 2.0 seconds. The actual time the FX drive will take to decelerate the motor from 1,800 RPM to zero is found by multiplying 2.0 seconds by 1,800/4,000 or 0.9 seconds.
brand | Product Name | Product model | Order No |
EMERSON | modular | FX316 | nothing |
Place of Origin | Marketable land | Imported or not | defects liability period |
Europe and America | Nationwide and overseas | yes | a year |
Place of shipment | Delivery method | How to use | Applicable industries |
Xiamen | Shunfeng Express | Commissioning and installation | Power Plant Steel Plant Cement Plant Shipboard Papermaking |
Service advantages | Foreign import, goods preparation and supply | Reasonable price and reliable quality | Pictures are for reference only |
Product features | Primary source of goods, supply by model | After sales guarantee | Chen 1810693-7731 |
This parameter only appears in Feed To Sensor and Registration Indexes. When this parameter is set to “Yes” and you select Registration Index, the FX drive will accelerate to the Feed Velocity and continue at that velocity until a signal is received on the input line assigned to Input Function #16, Feed Sensor Ø. Once the signal is received, the FX drive will start the Distance/Velocity part of the index. If you select a Feed To Sensor Index, the FX drive will execute the distance part of the index.
When the motor reaches that distance, the drive will change to Feed Velocity until the input line assigned to Feed Sensor Ø is activated or the Sensor Limit Distance is exceeded. If this parameter is set to Yes and the parameter Feed To Sensor (1) is also set to Yes, the FX drive will continue at the feed velocity until either Feed Sensor Ø or 1 receives a valid input.