106M1079-01 3500/15 Power Card

106M1079-01 3500/15 Power Card

The 3300 series proximity sensor system measures machine vibration and the position of the shaft or other machine components relative to the probe tip. The system consists of a 5mm or 8mm displacement gauge needle, an extension cable, and a Proximitor ®
Sensor composition.
The components of the 3300 sensor system are designed to operate as a unit and calibrated for AISI 4140 steel target materials. The system uses eddy current principle to measure displacement and provides communication with targets and probes
Negative voltage proportional to the distance between tips. This voltage signal can be applied to monitors, portable instruments, or diagnostic equipment.
Usage recommendations and warnings
The design purpose of the 3300 proximity sensor is to measure vibrations in the position or frequency range of 0 to 6.5 kHz. Typical applications of this system include radial vibration and position, axial position, and Ke
Yphasor ® measure
1.1 Receiving, Inspection, and Processing System
The probe, extension cable, and Proximitor sensor are provided as separate units and must be interconnected by the user at the installation location. Carefully remove all equipment from the shipping container and check for any shipping damage.
If there is obvious shipping damage, please file a claim with the carrier and submit a copy of the claim document to the nearest Bently Nevada office. Please indicate the part number and serial number in all communications.
If the damage is not obvious and the equipment is not immediately used, please put the equipment back into the shipping container and reseal it for future use.
Please store the equipment in an environment free from high temperatures or corrosive gases that may cause damage.

Contact information: