128229-01 Modbus Register Function – Bently

BENTLY 128229-01 monitor provides mechanical protection

128229-01 Transducer Jumper Status (on I/O Module)
Returns the position of the Transducer Jumper on the Proximitor/Seismic I/O Module. Refer to Section 4.1 (Setting the I/O Jumper)for the function of
this jumper.

128229-01 Alarm Mode
Latching
Once an alarm is active, it will remain active even after the proportional value is no longer in alarm. The alarm state will continue until the channel is reset. See Page 54.

128229-01 Nonlatching
When an alarm is active, it will go inactive as soon as the proportional value is no longer in alarm. Alert is the first level alarm that occurs when the transducer signal level exceeds the selected value. Danger is the second level alarm that occurs when the transducer signal level exceeds the selected value. The Alert and Danger values are set on the Setpoint screen.

Barriers
Select the MTL 796(-) Zener External option, or Galvanic Isolators if external safety barriers are connected between the monitor and the transducer. If
using an Internal Barrier I/O Module, select the internal option. These devices are used to restrict the amount of energy that can flow into a hazardous area.

The Bently 3500 online vibration monitoring system from the United States is used for mechanical protection applications, for vibration monitoring of large and medium-sized rotating machinery such as steam turbines, compressors, fans, water pumps, coal mills, gearboxes, motors, etc. It is widely used in steel, power, metallurgy, petrochemical petroleum, natural gas, petrochemical, chemical and other related industrial fields. The highly modular design of the system includes:
Bently3500/05 Instrument Frame
Bently3500/15 power supply
Bently 3500/20 Framework Interface Module
Option Description
A: Power type (upper slot)
01 Low voltage AC (85 to 132 Vac rms)
0 2 High Voltage AC (175 to 264 Vac rms)
0 3 high-voltage direct current (88 to 140 Vdc)
0 4 low-voltage DC (20 to 30Vdc)
05 Universal Power Supply
B: Power type (lower slot)
0 0 No power supply (only used when a single power supply is required)
05 Universal Power Supply