3500/22 146031-01 Bently Nevada RIM I/O module

Description

3500/22 146031-01 This will only allow changes to setpoints in any of the monitors only if the keylock
is in the program mode position. If the key is in the run position, setpoint changes
will not be allowed.
Disable Front Communication Port of RIM
This option disables all write functions through the front communication port on
the Rack Interface Module when selected. When in this mode the Rear
Communication Port is still active.
Drive Rack NOT OK Relay if Rack Address is Changed to Run Mode
When selected, this option will force the NOT OK Relay into a NOT OK state if the
Rack Address is changed at any time while the key switch is in the run position.
Drive Rack NOT OK Relay if a Module is Removed From the Rack
When selected, this option will force the NOT OK Relay into a NOT OK state if any
module is removed from its slot in the Rack.

The Rack Interface Module has three hardware switches that are located on the
front panel.
Key Switch
The Key Switch is used to prevent unauthorized changes to the configuration
settings. When the switch is in the RUN position, the 3500 rack cannot be
configured. When the switch is in the PROGRAM position, the 3500 rack can be
configured and the rack continues to operate normally. By removing the key, you
can lock the Rack Interface Module in the RUN or PROGRAM position.
Rack Reset
See Rack Trip Multiply and Reset.
Rack Address
The host computer uses the Rack Address to identify 3500 racks that are linked in
a daisy chain. Set the rack address by using a 6-position DIP switch which
provides for 63 possible addresses. All racks in a daisy chain must have a unique
rack address. The following diagram and table show how to select the address
110001 (49 decimal).

The Rack Reset function can be initiated by any of the following:
• 3500 Rack Configuration/Display Software.
• Communication Gateway.
• Hardware contact on the front of the RIM I/O module.
• Push button switch on the front of the RIM.
A rack reset will cause the RIM to send a module reset command to every module in the
rack. See the Operator and Maintenance manual for the desired module to verify how the
monitor will respond to this command. For example, on the 3500/42, the reset can be used
to clear latched alarms.

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

135785-01 3500/93 Display Unit, non backlighted
135785-02 3500/93 Display Unit, back-lighted
137412-01 3500/93 Manual
135799-01 3500/93 Display Interface Module
135799-02 3500/93 Display Interface Module
(use with A05 option only)
135813-01 3500/93 Display Interface I/O
Module
136634-0010-01 10 Foot (3 metres) Cable (PVC)
136634-0050-01 50 Foot (15 metres) Cable (PVC)
136634-0050-02 50 Foot (15 metres) Cable
(Teflon? )
136634-0100-01 100 Foot (30 metres) Cable (PVC)
136634-0100-02 100 Foot (30 metres) Cable
(Teflon? )
130121-02-01 500 Foot (152 metres) Extension
Cable (PVC)
130121-02-02 500 Foot (152 metres) Extension
Cable (Teflon? )
02200271 External Power Supply for 115 Vac
02200272 External Power Supply for 230 Vac
138227-01 Cable Adapter
146085-01 Power Cable
137224-01 System Mounting Assembly
(sheet metal for A01 & A05
options)
04309007 4-40 X 0.63 Phillips head screw for
System Mounting Assembly, 4 are
required