3500/22 164466-01 Bently Nevada RIM Host Port Module

Description

3500/22 164466-01 The function of the Data Manager I/O module is to connect
the 3500 rack to TDIX or DDIX Communication
Processors. Each port can connect up to 24 channels,
from the 3500 rack to the Communication Processor.
Refer to the table on page 12 for the different options
that are available.
1) Used to transfer the static information from Port 1 of
this 3500 rack to the static connector on the
Communication Processor.
2) Used to transfer the dynamic information from Port
1 of this 3500 rack to the dynamic connector on
the Communication Processor.
3) Used to transfer the information from Port 2 of this
3500 rack to the static connector on the
Communication Processor.
4) Used to transfer the dynamic information from Port
2 of this 3500 rack to the dynamic connector on
the Communication Processor.

This section shows how to verify that the Rack Interface Module and the I/O modules
are operating correctly. When performed properly, this module may be installed into
or removed from the rack while power is applied to the rack. Refer to the Rack
Installation and Maintenance Manual (part number 129766-01) for the proper
procedure.
RIM Host Port Test Utility
Use the RIM Host Port Test Utility to verify that the HOST ports on the Rack
Interface Module and the Rack Interface I/O Module are operating properly.
Before running the RIM Host Port Test Utility, connect Cable 130118-XXXX-XX
(Host to 3500 Rack RS-232 Interface Cable) between the Configuration Port
connector on the front of the Rack Interface Module or to the HOST connector on
the Rack Interface I/O Module and the computer that has the utility installed.
Refer to the 3500 Monitoring System Rack Configuration and Utilities Guide and
the Rack Configuration Software for the details of this utility.
Performing Firmware Upgrades
Occasionally it may be necessary to replace the original firmware that is shipped with
the 3500/20 Rack Interface Module (RIM). The following instructions describe how to
remove the existing firmware and replace it with upgrade firmware. The RIM will need
to be reconfigured using the 3500 Rack Configuration software after having its
firmware upgraded.
The following items are required to perform a firmware upgrade to the RIM:
Large Flathead Screwdriver.
Grounding Wrist Strap.*
Small Flathead Screwdriver
Upgrade Firmware IC.*

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

135785-01 3500/93 Display Unit, non backlighted
135785-02 3500/93 Display Unit, back-lighted
137412-01 3500/93 Manual
135799-01 3500/93 Display Interface Module
135799-02 3500/93 Display Interface Module
(use with A05 option only)
135813-01 3500/93 Display Interface I/O
Module
136634-0010-01 10 Foot (3 metres) Cable (PVC)
136634-0050-01 50 Foot (15 metres) Cable (PVC)
136634-0050-02 50 Foot (15 metres) Cable
(Teflon? )
136634-0100-01 100 Foot (30 metres) Cable (PVC)
136634-0100-02 100 Foot (30 metres) Cable
(Teflon? )
130121-02-01 500 Foot (152 metres) Extension
Cable (PVC)
130121-02-02 500 Foot (152 metres) Extension
Cable (Teflon? )
02200271 External Power Supply for 115 Vac
02200272 External Power Supply for 230 Vac
138227-01 Cable Adapter
146085-01 Power Cable
137224-01 System Mounting Assembly
(sheet metal for A01 & A05
options)
04309007 4-40 X 0.63 Phillips head screw for
System Mounting Assembly, 4 are
required