Description
Cutout dimensions 199 ±0.5 mm x 143 ±0.5 mm suitable for
4PP120.0571-01
4PP120.0571-21
4PP220.0571-45
4PP220.0571-65
4PP220.0571-85
4PP220.0571-A5
5PP120.0571-27
¥7,500.00
Manufacturer: B&R
Part number: 4PP220.0571-45
Product catalog: 4PP220.0571-45 Power Panel 220 LCD B/W QVGA 5.7″ T MH 1aPCI
Warranty maintenance: one year
Email: geabbdcs@gmail.com
4PP220.0571-45 4PP220.0571-R5 B&R Power Panel
4PP220.0571-45 4PP220.0571-R5 B&R Power Panel
4PP220.0571-45 Power Panel 220 LCD B/W QVGA 5.7″ T MH 1aPCI Power Panel PP220; 5.7″ QVGA b/w LC display with touch screen (resistive), CompactFlash slot (type I), ETH 10/100, RS 232, 2x USB; 64 MB SDRAM; 1 aPCI Slot; 256 kB SRAM; battery; metal housing, IP65 protection (front side); 24 VDC.
4PP220.0571-45 Cutout installation
The cutout hole is to be made according to the following dimensions for cutout installation. The device must be mounted using the retaining clips included in delivery. The defined position for mounting the retaining clips can be seen in the dimension diagram (see figure 112 “Dimensions – 4PP220.0571-45” on page 168) For further information regarding mounting, see Chapter 3 “Commissioning” on page 435.
Cutout dimensions 199 ±0.5 mm x 143 ±0.5 mm suitable for
4PP120.0571-01
4PP120.0571-21
4PP220.0571-45
4PP220.0571-65
4PP220.0571-85
4PP220.0571-A5
5PP120.0571-27
4PP220.0571-45 4PP220.0571-R5 B&R Power Panel
The following model numbers have either been updated or added: 4PP120.0571-01, 4PP120.0571- 21, 4PP120.1043-31, 4PP120.1505-31, 4PP220.0571-45, 4PP220.0571-65, 4PP220.0571-85, 4PP220.0571-A5, 4PP220.1043-75, 4PP220.1043-B5, 4PP220.1505-75, 4PP220.1505-B5, 5PP120.0571-27, 5PP120.1043-37, 5PP120.1505-37, 0AC201.9, 0TB103.9 0TB103.91, 0TB704.9, 0TB704.91, 3IF772.9, 3IF786.9, 3IF787.9, 3IF789.9, 9A0013.01, 9S0001.13- 010, 9S0001.13-02