5SHY3545L0010 3BHB013088R0001 ABB Drive control thyristor module

Description

Turn to page 31 for more details about the end-user’s responsibilities.
What about spare parts that I buy for a drive? Do I negate the CE mark if
I replace a component?
Equipment supplied before the application of the directives,
can be repaired and supplied with spare parts to bring it back
to the original specification. However, it cannot be enhanced or
reinstalled without meeting the directives.
For equipment supplied after the application of the directives,
the use of the manufacturer’s spare parts should not negate the
CE marking. However, the manufacturer or supplier should be
consulted about upgrading, as some actions could affect the
CE marking criteria.
If drives are classed as components, on subassemlies they cannot be
EMC certified or carry a CE mark. Is this true?
You need to first understand the terminology now being applied
to drives. See below and pages 21 and 22 for this.
A complete drive module (CDM) is normally a component in a
system and as such has no functional value unless it is connected
to the motor when it becomes a PDS.
The CDM shall be CE marked if it is to be installed with simple
connections and adjustments that do not require any EMCknowledge.
If awareness of the EMC implication is needed in order to install
a CDM, it is not considered as an apparatus. Thus, it shall not
be CE marked according to the EMC directives.
If a CDM or BDM is intended for incorporation in PDS by professional manufacturers only (panel builders, machine builders), it
shall not be CE marked, nor is Declaration of conformity given
by the CDM/BDM manufacturer. Instead installation instructions
shall be supplied in order to help the professional manufacturers.