5SHY3545L0016 3BHB020720T0002 ABB Drive control thyristor module

Description

…You have the following responsibilities:
1. Because you are building a complete machine, which includes coupling up the motors to the PDS and providing the
mechanical guarding and so on, you are liable for the total
mechanical and electrical safety of the machine as specified
in the Machinery Directive.
Therefore, the PDS is ultimately your responsibility. You need
to ensure that the entire PDS meets the Machinery Directive.
Only then can CE marking be applied to the whole machine.
2. You are also responsible for the electrical safety of all parts of
the PDS as specified in the Low Voltage Directive.
3. You must ensure electrical equipment and components are
manufactured in accordance with the EMC Directive. The
manufacturer of these parts is responsible for EMC for that
particular part. Nevertheless you are responsible for EMC for
the machine. You may choose electrical parts not in accordance with the EMC directive, but then you have the responsibility for compliance of parts.
Note: Be aware that combining CE marked sub-assemblies
may not automatically produce an apparatus that meets the
requirements.
4. You must ensure that the PDS or its component parts carry
declarations of conformity in accordance with the electrical
safety requirements of the Low Voltage Directive.
5. You must be able to assure an authority and customers
that the machine has been built according to the Machinery
Directive, the Low Voltage Directive and the EMC Directive. It may be necessary to issue technical documentation to
demonstrate compliance. You must keep in mind that you and
only you have responsibility for compliance with directives.
6. A Declaration of conformity according to the directives above
must be issued by the machine builder and CE marking must
then be affixed to the machine or system.
7. Any machine that does not comply must be withdrawn from
the market.