CI502 ABB Programmable controller robot drive card module

Description

The main difference between CI502 is the connection distance. What is the distance between the rack with CPU and the rack to be connected
What about? If the connection distance from the CPU rack is within 50 feet (15 meters) or less, use the expansion base
Plate. The CI502 has better performance when connected in the expansion mode, because the expansion has a higher communication rate with the rack installed with CPU,
Of course, if the required cable connection distance between a rack and the CPU rack exceeds 50 feet, then expand the rackIt will not work properly, so the remote rack connection mode must be used. The farthest remote rack is the same as the CPU
The maximum cable connection distance is 700 feet (213 meters).

The installation instructions for PLC installation described in this chapter are only for rings that do not require special noise or hazard treatment
CI502 must be installed according to strict requirements (such as GE mark), see GFK-1179, consistent and standard installation
Ask. See also GFK-0867, GE Fanuc Product Certification, Standard and General Instructions.
Accept the product – visual inspection
When the user receives the Series 90-30 PLC system, carefully inspect all possible damages during container shipment
If any part of the system is damaged, notify the carrier immediately, and the damaged container should be stored for inspection by the carrier
Evidence of investigation.
As the consignee, you are responsible for making a claim against the carrier for the damage occurred during the shipment. However, if necessary, GE
Fanuc will cooperate fully.
Inspection before installation
After taking out the series 90-30 PLC rack, cable, module, etc., CI502 records all serial numbers. The serial numbers are printed on the package of the module,
The serial number is the basis for claims during the equipment warranty period. All software product registration cards should be returned to GE Fanuc after completion. ginseng
See the module serial number position in “Module Features” of this chapter, and refer to the relevant substrate sequence in “Common substrate characteristics” of “Base plate” chapter
No.
You should check whether all parts of the system you have received are consistent with those you ordered
Please call the programmable control customer service toll free number 1-800-432-7521. The customer service representative will
Provide further help.
If you need installation assistance, GE Fanuc Technical Service Department will provide you with professional assistance
The list in “Repair and troubleshooting” provides you with the service phone number in your area by visiting the GE Fanuc website
Relevant information can also be found at www.Gefanuc.com/support/plc
Series 90-30 Template Features
1 Pivot hook
2 Circuit panel fixing cards (two on each side of the module)
3 Description part of catalog number and label
4 Certification of labels (UL, CE, etc.) part
5 Module connector – plug into the baseplate backplane connector
6 Release lever – elastic device
7 Ventilation openings in the module (top and bottom)
8 Flap door fixing card (two on each side of the module)
9 Loose leaf door (shown) or terminal panel (for I/O template)
10 Hanging cover of loose leaf door panel or terminal panel
11 Indicator light cover
12 Indicator fixing card (one on each side of the module)
13 Module label
14 Serial number – used to determine the warranty status of the module. (In some modules, the serial number may be a small
On the label.)

details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.