ABB CI626A 3BSE005029R1 Analog module industrial system controller

Description

Packaging details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.

For a Companion Slot configuration, two adjacent slots in a Trusted® Chassis
are configured for the same input module function. One slot is the primary
slot and the other a unique secondary (or spare) slot. The two slots are joined
at the rear of the Trusted Chassis with a double-wide I/O Interface Cable that
connects both slots to common field wiring terminations. During normal
operations, the primary slot contains the Active Module as indicated by the
Active indicator on the Front Panel of the Module. The secondary slot is
available for a spare Module that will normally be the Standby Module as
indicated by the Standby indicator on the Front Panel of the Module.
Depending on the installation, a hot-spare Module may already be installed, or
a module blank will be installed in the standby slot. If a hot-spare Module is
already installed, transfer to the Standby Module occurs automatically when a
module fault is detected in the Active Module. If a hot-spare is not installed,
the system continues operating from the Active Module until a spare Module
is installed.
For a SmartSlot configuration, the secondary slot is not unique to each
primary slot. Instead, a single secondary slot is shared among many primary
slots. This technique provides the highest density of Modules to be fitted in a
given physical space. At the rear of the Trusted Chassis, a single-wide input
jumper Cable connects the secondary slot directly to the I/O Cable connected
to the failed primary Module. With a spare Module installed in the SmartSlot
and the SmartSlot I/O Cable connected to the failed primary Module, the
SmartSlot can be used to replace the failed primary Module.
Input Module Smart Slot jumper cable TC-306-02
Smart Slot between Chassis can be performed if the Chassis are version 2 (or
higher). These have the connector fitted to enable connection of a TC-006 that
ensures the 0 Volt of each Chassis is at the same potential.
If an I/O Module has shut down (due, for example, to two existing faults), the
three Healthy LEDs will be red, the Active and Standby LEDs will be flashing
red and the Educated LED will be flashing amber. The I/O functions provided
by this Module will have been lost if a hot swap partner has not taken over
control. The Module can only be restarted by removing it from its slot and
reinserting it.
If an I/O Module is inserted into a functional system slot that previously had
no Active Module (e.g. removing and reinserting as above), then the Processor
will educate the Module once it has booted. Once educated, the Educated LED
will be steady green and the Active LED will be red flashing.