Sale!

ABB CPU86-10MHZ+S100M Monitoring redundant controllers

¥668.00

Part Number:CPU86-10MHZ+S100M

CPU86-10MHZ+S100M If there are quality issues, you can help repair them

If there is any need, please contact us and we will reply to you as soon as possible

Category: Tag:
Whatsapp:+86 15359293870
WeChat:+86 18106937731
                E-mail:geabbdcs@gmail.com
Contacts:kelly CHEN

Description

he I/O expander bus interface is implemented using an

ABB-designed integrated circuit. The microprocessor can

select one of two modes of operation: DMA or auto mode. The

controller software selects the mode of operation. Mode selec

tion is based on optimizing the number of bytes to be trans

ferred. In either mode of operation, the microprocessor does

not need to wait for each byte to transfer (as in previous con

trollers).

The controller connects to the I/O expander bus through the

P2 connector on the MMU backplane. It is an eight-bit parallel

bus that provides the communication path for I/O data from

Harmony rack I/O controllers. The I/O expander bus supports

up to 64 low power rack I/O devices.

I/O Section

The I/O section interface allows the microprocessor to read the

switches that tell it how to operate and set the controller

address. This section also contains latches whose outputs

connect to the status and error LEDs. This section monitors

redundant controllers and outputs a signal to the controller

active LED on the NTMP01. Upon failover, this output de-ener

gizes and the output of the redundant controller energizes its

controller active LED on the NTMP01 as it takes over. Addi

tionally, the I/O section monitors the stop/reset pushbutton.

When the pushbutton is pressed, the I/O section insures that

the controller completes any I/O functions before it stops the

controller.

Serial Channels

Two independent serial channels (RS-485) are available on the

controller. Both serial channels are dedicated for language

support (C). Clear to send (CTS) and request to send (RTS)

handshake signals are supported. A DUART circuit on the

controller supplies the serial channels with handshaking sig

nals. Clock signals for the baud rate generator are derived

from an onboard, 7.3728-megahertz oscillator.

 

Details: If you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.
Price issue: If you find that other suppliers offer a cheaper price for the same product, we are also willing to provide you with a reference price and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

 

Stock products of the same series:

SAFT 169 PAC
SAFT 181 INF
SAFT 125 CHC
SAMC 11 POW
ABB CPU86
SAFT 189 TSI
IOD86MEM
SAFT 25F 380
SAFP 25 PAN
ABB UAC389AE01
RLM01
3BSE003127R1
ABB DSAO120A
ABB FI 830F
ABB SC520
ABB DSQC658
PM802F
ABB NDCU-51
NMBC-01
ABB CS31 07KT92
DSDP150
DSTD150A
ABB SC510
GJR5252400R0101
ABB CI627A
ABB FI810F
DSTX170
ABB DRA02
ABB PM511V08
ABB NDBU-95C