ABB CS513 3BSE000435R1 Analog module industrial system controller

Description

Packaging details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.

The CI860 / TP860 assemblies, as shown in Figure 34 on page 90, are used for
connecting FOUNDATION Fieldbus High Speed Ethernet (FF HSE) devices to the
AC 800M. It is also possible to communicate with FOUNDATION Fieldbus H1
devices, via the HSE Linking Device (LD 800HSE), see Appendix B,
Recommended Components. FF HSE has a communication speed of 10/100 Mbit/s.
The CI860 unit supports the FOUNDATION Fieldbus High Speed Ethernet
interface. The FF HSE network is connected with an 8 pin RJ45 connector (COM)
via the Base plate (Ethernet TP Standard). The base plate has a preset, two letter
Alpha code lock, to prevent the installation of an incorrect type of unit onto the
TP860 base plate.
The CI860 is powered by the processor unit, via the CEX-Bus, and therefore does
not require any additional external power source.
The CI860 is connected, via a transformer, to the FF HSE bus and thus neither
supplies nor consumes electrical power from the FF HSE bus. The FF HSE bus is a
standard Ethernet cabling.
Connection of the Fieldbus Builder FF can be made via an OPC server
FOUNDATION Fieldbus to the FF HSE network.
The CI860 can be set redundant and supports hot swap. CI860 cannot be used in
a High Integrity controller.