DAPC100 3ASC25H203 ABB Communication interface robot power supply

Description

DAPC100 has four LED indicators, three of which are next to each other and are Ethernet interface indicators: EOK, LAN and
STAT。 These lights can be turned on, off, slow flashing or fast flashing in some different combinations. About these indicators
Refer to GFK-1541, Series 90 PLC TCP/IP Ethernet Communication User’s Manual for detailed function description of
The fourth indicator, PS PORT, indicates the serial port of the CPU and has no connection with the Ethernet interface
The light will flash when DAPC100 transmits data through the SNP serial port connector on the PLC power supply template, and it will turn off when the serial port does not work.

(In some earlier 364 CPU products, this LED is counted as “SNP”) All series 90-30 CPUs
All have this standard serial port
Ethernet reset button
This button has four functions: LED test, restart, restart and enter the software download state, restart and enter
Enter maintenance status. For detailed descriptions of these functions of DAPC100, see GFK-1541, Series 90 PLC TCP/IP Ethernet communication
Household manual
This is a standard CPU key switch, which was described earlier in this chapter
Connector on the front of the panel
Refer to GFK-1541, Series 90 PLC TCP/IP Ethernet Communication User Manual for detailed descriptions of these interface functions
■ Mgr Status – This connector uses an Ethernet interface to connect a terminal or emulation terminal to access the administrator software
Station. The RJ-11 connector has similar functions with Port 1 on CPU351, CPU352, CPU353 and CPU364
Yes, as shown in Table 5-5. Cable IC693CBL316 can be used to access this interface. Refer to Chapter 10 for information about this electricity
Description of cables
■ 10/100 Ethernet (Port 1 and Port 2) – This 8-pin RJ45 interface provides an embedded network
The network switch can be directly connected to Ethernet.
These two Ethernet interfaces are the automatic full duplex interfaces of 10-BASE-T/100-BASE-TX
The Ethernet interface cable is directly connected to one or two 10-BASE-T/100-BASE-TX, which can be grounded or
Ungrounded, can be directly connected or ring connected. Note that the two ports are connected by an embedded switch, so
It is not necessary to assign a separate IP address to each port.
Each LINK/ACT indicator lights up and flashes when the network has been established and data is transmitted through the interface
The indicator light of 100M turns on when 100M is connected, and turns off when 10M is connected
Grounding connection terminal
This terminal is used for the grounding connection of the template. To achieve this function, a wire needs to be connected to this terminal. See section 2
Chapter 2 describes relevant parts of “CPU363 and CPU364 grounding protection”
Firmware Update
■ The CPU firmware and Ethernet interface firmware are stored in the flash memory and are installed with the download program and CPU firmware software
The PC is updated through the serial connector installed on the PLC power supply template

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen