ABB DSAB-01C Analog module industrial system controller

Description

Packaging details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.

Start ACS880 transmission
1. Power on the transmission.
2. Set parameter 50.01 FBA A Enable to Enable to allow the adapter
Communication between module and drive.
3. Use parameter 50.02 FBA A comm loss func to select when the field bus communication is interrupted
How the drive reacts.
Note: This function not only monitors the communication between the Fieldbus host and the adapter module,
Also monitors communication between the adapter module and the drive.
4. Define communication interruption detection and selection with parameter 50.03 FBA A comm loss t out
The time between actions of.
5. Select the application defined values of the remaining parameters in parameter group 50, starting from 50.04.
The following table lists examples of corresponding values.
6. Set FPBA-01 configuration parameters of parameter group 51. At least, in parameter 51.02 Node
Set the required node address in address, and set it in 51.05 Profile
Message configuration.
7. Define the process of sending and receiving from transmission in FPBA-01 configuration parameter groups 52 and 53
data
Note: The adapter module automatically sets the status word and
Control word.
8. Save the valid parameter values by setting the parameter 96.07 Param save as Save
In permanent memory.
9. Set the parameter 51.27 FBA par refresh to Configure to set the parameter group to
The settings of 51, 52 and 53 take effect.
10. Set relevant transmission control parameters according to the application program to control the transmission. The following table lists
An instance of the corresponding value.