Sale!

ABB NGDR-02 Drive accessories

¥668.00

Part Number:NGDR-02

NGDR-02 If there are quality issues, you can help repair them

If there is any need, please contact us and we will reply to you as soon as possible

Category: Tag:
Whatsapp:+86 15359293870
WeChat:+86 18106937731
                E-mail:geabbdcs@gmail.com
Contacts:kelly CHEN

Description

It is possible to hold the speed reference at zero at start before the brake has opened. With time, or

time interrupted by limit switch “open”. This function prevents competition between the motor and

the brake as well as it reduces current/torque peaks.

A slow brake will cause wear of its own, bad regulation and high current/torque peaks.

An optimal setting is found during Start Up by studying Speed reference, Speed feedback and Ac

tual current at the same time with the monitor Tool.

The Compensation for slow brake opening shall be considered and adjusted prior to increasing the

monitor time for tachometer / encoder failure, parameter 10.15. If no influence is noted, check if the

designer has forgotten to activate the function with parameter 08.21.

Drive optimisation is normally only done for larger drives. Motors with shaft height from 400 mm and

larger together with the mechanical drive train should be treated with respect, and the experienced

site engineer has to find out the best settings for smooth electrical and mechanical performance.

The mentioned could also be valid for smaller motors.

Modify the current gain 11.03, normal value = 10,000, by making it double, half etc. to find a better

operation point. If it is found that it is stable for lower gain, but not for higher, lower the gain as

much as possible without getting a slower response on speed change. In this situation you should

once more try to increase the speed regulator gain; note that this might be an iterative process.

Opening the Special Parameter View Special all parameters of Design, Start Up and Special Views become

visible.

A special selection of the Special functions parameters that must be set during start up, i. e. not possible to

fix during design phase is presented below (this selection is not possible to get from the PC Tool).

Most times the Special functions parameters are not touched at all during the start up.

 

Details: If you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.
Price issue: If you find that other suppliers offer a cheaper price for the same product, we are also willing to provide you with a reference price and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

 

Stock products of the same series:

NAIO-01
NAIO-02
NAMC-03C
NAMC-11 3BSE015488R1
NBIO-21C 3BSE017427R1
NBRA-659C 59006436
NC4672A V1 HIEE205012R1
NCAN-02C 64527932
NCHM-21
NCHM-21C
NCSA-01 58920002
NDBU-95
NDCO-03 3BSE017193R1
NDCU-51 64300261
NDCU-51C
NDPA-02
NDPC-02
NETA-01 64637193
NFZ44E-23 1SBH136001R2344
NGDR-02
NGPS-12
NGPS-12C
NGPS13C 3AUA0000042489
NIMP01
NINT-64
NINT-68 61426650
NIOC-02C
NLWC-05
NMBA-01 3ADT220066R0005
NMBC-01
NPBA-12 64348221
NPCT-01
NPCU-01
NPOW-42C
NS1860b-P 3BHB001336R0001
NSD570
NTAC-01
NTAI02
NTAI04
NTAI06
NTAM01
NTCL01
NTCS04
NTMF01
NTMP01