Sale!

ABB PFTL301E 1.0 KN Mechanical stress sensor

¥668.00

Part Number:PFTL301E 1.0 KN

PFTL301E 1.0 KN If there are quality issues, you can help repair them

If there is any need, please contact us and we will reply to you as soon as possible

Category: Tag:
Whatsapp:+86 15359293870
WeChat:+86 18106937731
                E-mail:geabbdcs@gmail.com
Contacts:kelly CHEN

Description

The measuring principle of the sensor is based on the Pressductor® technology and the fact that
the permeability of a magnetic material changes under mechanical stress.
The transducer is made up of a stack of specially treated laminates, forming the measuring body.
Primary and secondary windings are wound through four holes in the sensor so that they cross at
right angles.
The primary winding is supplied with an alternating current which creates a magnetic fieKd around
the primary winding. Since the two windings are at right angles to each other, there will be no magnetic fieKd around the secondary winding, as long as there is no load on the sensor.


When the sensor is subjected to a mechanical force in the direction of measurement, the propagation of the magnetic fieKd changes so that it surrounds the secondary winding, inducing an alternating voltage in that winding.
The control unit converts this alternating voltage into a DC voltage proportional to the applied
force. If the measurement force changes direction, the sensor signal changes also polarity.
When choosing a mounting arrangement it is important to remember to position the load cell in a
direction that gives sufficient measuring force (FR) to achieve the highest possible accuracy.
The load cell has no particular correct orientation; it is positioned in the orientation best suited for
the application, bearing in mind the positions of the screw holes. The load cell can also be installed
with the roll suspended under the load cell.
The load cell has the same sensitivity in both directions, so that the load cell can be installed in
the easiest manner.
Typical mounting arrangements are horizontal and inclined mounting.
A coordinate system is defined for the load cell. This is used in force calculations to derive force
components in the load cell principal directions.
Where direction designations R, V and A are recognized as suffixes for force components, F, this
represents the force component in the respective direction. The suffix R may be omitted, when
measuring direction is implied by the context

 

Details: If you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.
Price issue: If you find that other suppliers offer a cheaper price for the same product, we are also willing to provide you with a reference price and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

 

Stock products of the same series:

PFTL301E-0.5KN
PFTL101A/3BSE004172R1
PFTL101A 3BSE004160R1
PFTL101A 1.0KN
PFTL 101B 2.0KN
NINT-72C
NDIO-02
PFSA146 3BSE008844R1
PFSA145 3BSE008843R1
PFSA140
LIMELITE 2000
PFEA112-20
PFEA111
PFEA111-20
PFEA111/112
KUC755AE105
KUC711AE101
PBSE5117
NTRO02-A
NTDI21-A
NTDI01
ICMK14N1
HIEE300936R0101
NINT-68
NDCU-21C
NDBU-95C
NCNA-01
NAIO-03F
MPRC086444-003
LXN1604-6 (P/N3BHL000986P7000)
FI810F
LTC391AE01
LDMUI-01
LC1000-S/SP7
ECS086329-003
KUC755AE117
INICT12
IMMFP12G-A