Negotiation of original ABB module accessory TA524 communication slot blind plate

Description

TA524 secondary function grouping
Three level function classification and display text description

Function description
P1._
STANDARD
TA524 basic parameter group
P1.0 ACTUATOR
Define the installation form of the positioner
P1.1 AUTO_ ADJ
Start the automatic tuning program
P1.2 TOL_ BAND
Set deviation band or dead band
P1.3 TEST
Test modification results
P1.4 EXIT
Exit to operation level
P2._
SETPOINT
Given signal group
P2.0 MIN_ RGE
Set the minimum value of the given signal (preset as 4mA)
P2.1 MAX_ PRG
Set the maximum value of the given signal (preset as 20mA)
P2.2 CHARACT
Select regulation characteristic curve
P2.3 ACTION
Set the positive and negative action mode of the valve
P2.4 SHUT-OFF
Set valve opening threshold
P2.5 RAMP⋀
Reduce the opening speed
P2.6 RAMP⋁
Reduce closing speed
P2.7 EXIT
Exit to operation level
P3._
ACTUATOR
Actuator characteristic group
P3.0 MIN_ RGE
Initial opening of regulating curve (preset as 0%)
P3.1 MAX_ RGE
Adjust the ending opening of curve (preset as 100%)
P3.2 ZERO_ POS
Direction setting of starting point (preset as fully closed, i.e. counterclockwise direction of feedback rod)
P3.3 EXIT
Exit to operation level
P4._
MESSAGES
P4.0 TIME _ OUT
Positioning timeout
P4.1 POS_ SW1
First position signal setpoint
P4.2 POS_ SW2
TA524 second position signal setpoint
P4.3 SW1_ ACTV
Valid above or below the first position signal
P4.4 SW2_ ACTV
Valid above or below the second position signal
P4.5 EXIT
Exit to operation level
P5._
ALARMS
Alarm function group
P5.0 LEACKAGE
Start actuator cylinder leakage alarm
P5.1 SP_ RGE
Start the given signal overrun alarm
P5.2 SENS_ RGE
Start zero drift alarm
P5.3 CTRLER
Alarm of starting remote control being switched
P5.4 TIME-OUT
Start positioning timeout alarm
P5.5 STRK_ CTR
Start the regulating stroke overrun alarm
P5.6 TRAVEL
Start the total travel overrun alarm
P5.7 EXIT
Exit to operation level
P6._
MAN_ ADJ
Manual adjustment
P6.0 MIN_ VR
Manually set the valve fully closed position
P6.1 MAX_ VR
Manually set the full open position of the valve
P6.2 ACTAUTOR
Select actuator type
P6.3 SPRNG_ Y2
Set the rotation direction of positioner feedback rod when the actuator spring is extended
P6.4 ADJ_ MODE
Select the items to be detected for automatic adjustment
P6.5 EXIT
Exit to operation level
P7._
CTRL_ PAR
Control parameters
P7.0 KP ⋀
Adjustment of open direction proportional coefficient
P7.1 KP ⋁
Adjustment of closing direction scale coefficient
P7.2 TV ⋀
Open integration time adjustment
P7.3 TV ⋁
Closing integration time adjustment
P7.11 EXIT
Exit to operation level
P8._
ANLG_ OUT
Analog signal output
P8.0 MIN_ RGE
TA524 valve position starting point current value (default is 4mA)
P8.1 MAX_ RGE
100% valve position current value (default is 20mA)
P8.2 ACTION
Positive and negative valve position selection (default 4mA corresponding to 0% valve position)
P8.3 ALARM
P8.4 TEST
P8.5 EXIT
Exit to operation level
Note: Except P1.1, P2.3, P3.2 and P8.2, other parameters do not need to be changed.
P1.1 is the automatic setting procedure, P2.3 is the positive and negative action form of the actuator (the positive action is to increase the air pressure at output port 1 and the valve rod goes down), P3.2 is the positive and negative adjustment form (the positive action is 4 mA corresponding to 0% of the valve position), and P8.2 is the positive and negative action form of the valve position feedback (the positive action is 0% of the valve position and the output is 4 mA)

details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.