ABB UFC760BE141 3BHE004573R0141 processor module

Description

UFC760BE141 The 8 Point Isolated Analog Voltage-source Output Module provides the following alarms:

Over/Underrange: if an engineering units value sent by the host has resulted in an output

value within approximately 50mV UFC760BE141 of the module’s maximum or minimum.

Loss of User Power

Uncalibrated Module

If an alarm occurs, the module sets a bit in its optional discrete input data. These alarm bits can be

monitored by the application logic. They can be reset by sending appropriate alarm-clearing

discrete output data to the module.

 

brand	Product Name	Product model	Order No
ABB	modular	UFC760BE141	3BHE004573R0141
Place of Origin	Marketable land	Imported or not	defects liability period
Europe and America	Nationwide and overseas	yes	a year
Place of shipment	Delivery method	How to use	Applicable industries
Xiamen	Shunfeng Express	Commissioning and installation	Power Plant Steel Plant Cement Plant Shipboard Papermaking
Service advantages	Foreign import, goods preparation and supply	Reasonable price and reliable quality	Pictures are for reference only
Product features	Primary source of goods, supply by model	After sales guarantee	Chen 1806092-3929

 

UFC760BE141 The 8 Point Isolated Analog Voltage-source Output Module uses the following types of data:

0-8 words of analog output data

0-3 bytes of discrete input data for module and channel status.

0-2 bytes of discrete output data for clearing alarms.

The module exchanges data with a Bus Interface Unit in the same manner as other types of I/O

modules-it provides all its input data and status UFC760BE141 bits when requested by the BIU, and receives fault

clearing commands and analog output data from the BIU.

UFC760BE141 The module can also be configured for “Group” data transfer with the BIU or with other intelligent

devices in the same Field Control station. Group data is described in the Bus Interface Unit User’s

Manual.

Compatibility

This module must be used with a Bus Interface Unit revision 2.0 or later.

Like other Field Control modules, the 8 Point Isolated UFC760BE141 Analog Voltage-source Output Module is

usually configured from the Bus Interface Unit, using a compatible hand-held programmer. The

module’s configuration can also be read or written from the bus in a system which supports such

configuration. The table below summarizes configuration choices and defaults. The module will

power up with the default configuration settings. For configuration instructions, refer to the Bus

Interface Unit User’s Manual.

Module

Parameter

Description Default Choices

Analog Output

Data Length

Length in words for the module’s analog output data in the BIU’s

analog output (AQ) table.

8 words 0-8

Analog Output

Reference

UFC760BE141 Starting offset for the module’s analog output data in the BIU’s

analog output (AQ) table.

User

selected

Discrete Input

Data Length

Length in bits for the module’s optional discrete input diagnostic

data in the BIU’s discrete input (I) table.

24 bits 0, 8, 16,

24

Discrete Input

Reference

Starting offset for the module’s diagnostic data in the BIU’s

discrete input (I) table.

User

selected

UFC760BE141 Discrete Output

Data Length

Length in bits of the module’s optional discrete output fault

clearing data in the BIU’s discrete output (Q) table.

16 bits 0, 8, 16

Discrete Output

Reference

Starting offset for the module’s fault clearing data in the BIU’s

discrete output (Q) table.

User

selected

(BIU) Defaults:

Input data

If the BIU loses communications with the module, the module’s

discrete input (diagnostic) data can be set to zero or hold its last

state.

Zero

Zero,

Hold Last

State

(BIU) Defaults:

Output data

If the BIU loses communications with the network, the module’s

discrete (fault clearing) and analog output data can be set to zero

or hold its last state.

Zero

Zero,

Hold Last

State

Local Defaults:

Outputs

If a reset or local failure occurs, the module can set the actual

outputs to zero or hold their last values (this requires local

power).

Zero Zero,

Hold Last

State

Channel Active

Whether a channel will respond to commanded analog and

discrete output data and return alarms. If a channel is inactive its

output is zero. If a previously-active channel is reconfigured as

inactive, any pre-existing alarms can still be cleared using Q data.

Active Inactive,

Active

Range

There are two preset scaling ranges.

+/-10V (bipolar) range: span and engineering units from +/-

10,000.

0 to 10V (unipolar) range: span and engineering units from 0 to

10,000.

+/- 10V +/-10V,

0 to 10V

Span Low

Actual voltage in millivolts to be scaled to low engineering units. -10,000

-16,384 to

+16,383

Span High

Actual voltage in millivolts to be scaled to high engineering

units.

+10,000

Engineering Low

Engineering units equivalent of the low span value. -10,000

Engineering High

Engineering units equivalent of the high span value. +10,000

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

 

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen