ABB UFC760BE143 3BHE004573R0143 DSP signal concentrator board

Description

UFC760BE143 An Auxiliary Terminal Block can be used to provide additional wiring terminals for the shields.

Auxiliary Terminal Blocks have all terminals connected together internally. The Auxiliary

Terminal Block with box terminals (IC670TBM002) has 13 terminals; UFC760BE143 each accommodates one

AWG #14 (avg 2.1mm2 cross section) to AWG #22 (avg 0.36mm2 cross section) wire. The

Auxiliary Terminal Block UFC760BE143 with barrier terminals (IC670TBM001) has nine terminals; each can

accommodate one or two wires up to AWG #14 (avg 2.1mm2 cross section).

UFC760BE143 An Terminal Block with Box Terminals has 25 terminals per module. Each accommodates one

AWG #14 (avg 2.1mm2 cross section) to AWG #22 (avg 0.36mm2 cross section) wire, or two wires

up to AWG #18 (avg. 0.86mm2 cross section). If an external jumper is used, single-wire capacity is

reduced from AWG #14 (2.10mm2 ) to AWG #16 (1.32mm2 ).

An I/O Terminal Block with Barrier Terminals has 18 terminals UFC760BE143 per module. Each terminal can

accommodate one or two wires up to AWG #14 (avg 2.1mm2 cross section).

An I/O Terminal Block with Connectors has one 20-pin male connector per module.

All Return terminals are common to each other

UFC760BE143 The 8 Point Isolated Analog Voltage-source Output Module performs diagnostics and provides 24

bits (3 bytes) of diagnostic data to the BIU. Data is placed in the BIU’s discrete input (I) data table

starting at the configured reference. The module sets the appropriate bit of this data when a

diagnostic condition is detected. Diagnostics bits remain set until cleared by the appropriate data

outputs, as described below. The condition causing the fault must be corrected, or the module will

set the bit again. Use of this data is optional. UFC760BE143 The module is easily configured to use all, some, or

none of the diagnostic data

The BIU uses two bytes of discrete output data to clear the module fault and alarm bits. The fault

clearing bits start at the module’s configured discrete output reference in the BIU’s discrete output

(Q) table. Setting a bit in the first byte of discrete output data to 1 clears the over/underrange

alarms for the corresponding channel (even if the alarm conditions are still present).

Bits #0-2, 4, and 6 in the module diagnostics byte are calibration-related and should never be set

during normal operation. These bits cannot be cleared using discrete output (Q) data. If any of these

bits is set during normal operation (not during calibration), a problem exists and the module should

be returned.

UFC760BE143 The Analog Output Module (IC670ALG320) provides a group of four current/voltage analog

outputs. Each output channel provides a span of 4-20mA and 0-10V, which can be changed to 0-

20mA and 0-12.5 volts by adding jumper on the I/O Terminal Block. Default scaling is 0 to 20,000.

Scaling can be changed in configuration to match the output used or to engineering units.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen