ABB valve V18345-1010521001 double acting with feedback TZIDC

Description

V18345-1010521001 Instrumentation grade shielded twisted pair or 3 wire twisted (triad) wire should be used for best

noise immunity. The shield should be terminated at a local panel ground near the module.

The module local loop supply may be either floating or grounded, and may be shared with other

similar functions. V18345-1010521001 All loads have a common return bus (RET) available at the module for the

negative side of the loads. This is internally connected through a 10-Ohm buffer resistor to the

supply negative side B terminal. Normally, only ungrounded loads are recommended.

V18345-1010521001 If a grounded load must be driven, a circulating ground loop current may be set up between the

load and ungrounded module supply. (This may reduce accuracy). The internal resistance lessens

the effect for small ground voltage differences

V18345-1010521001 Auxiliary Terminal Block may be used to provide additional wiring terminals. For the I/O Terminal

Block with Wire to Board Connectors, external connection points are usually preferred, although an

Auxiliary Terminal Block can be used.

Auxiliary Terminal Blocks have all terminals connected together internally. The Auxiliary

Terminal Block with box terminals has 13 terminals,V18345-1010521001 each of which accommodates one AWG #14

(avg 2.1mm2 cross section) to AWG #22 (avg 0.36mm2 cross section) wire, or two wires up to

AWG #18 (avg. 0.86mm2 cross section). The Auxiliary Terminal Block with barrier terminals has

nine terminals, each of which can accommodate one or two wires up to AWG #14 (avg 2.1mm2

cross section).

V18345-1010521001 The Panel Ground Shield from the Auxiliary Terminal Block to the panel should be AWG #14

wire, not longer than 4 inches (10cm).

The 8 Point Analog Current-source Output Module (IC670ALG330) accommodates 8 current-loop

outputs on a common power supply. It provides eight channels of analog current outputs with user

configurable scaling for each channel.

Supports 8 channels of output currents ranging from 0 to 20 mA with 16-bit resolution.

Output overrange provided for up to approximately 20.48mA.

Uses both word and bit data types.

V18345-1010521001 Can be field-recalibrated or reset to factory calibration. Calibration data stored in FLASH memory.

Individual channel configuration including default output level and scaling parameters.

Reports Under/Overrange, and Open Wire alarms.

Power Sources

The 8 Point Analog Current-source Output Module requires a separate source of power for the

outputs.

LEDs

A single indicator shows module status:

ON: normal operation

Intermittent flashing: module fault

OFF: No backplane power, no user power, or fatal fault.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 180 6092 3929
Mail: 2235954483@qq.com
Contact: Chen