AKM32D-ANC2R-00 Right angle deceleration servo motor

Description

AKM32D-ANC2R-00 Right angle deceleration servo motor

AKM32D-ANC2R-00 Right angle deceleration servo motor

Servomotors are precision equipment. The flange and shaft are especially vulnerable during storage and assembly — so avoid brute force. Precision requires delicacy. It is important to use the locking thread which is provided to tighten up couplings, gear wheels or pulley wheels and warm up the drive components, where possible. Blows or the use of force will lead to damage to the bearings and the shaft.

The AKM series of synchronous servomotors is designed especially for drives for industrial robots, machine tools, textile and packing machinery and similar with high requirements for dynamics. The user is only permitted to operate the motors under the ambient conditions which are defined in this documentation.

The AKM series of motors is exclusively intended to be driven by servoamplifiers from the SERVOSTAR series under speed and / or torque control. The motors are installed as components in electrical apparatus or machines and can only be commissioned and put into operation as integral components of such apparatus or machines.

The motors must never be connected directly to the mains supply. The thermal contact which is integrated in the motor windings must be observed and evaluated. The conformity of the servo-system to the standards mentioned in the manufacturers declaration on page is only guaranteed when the components (servoamplifier, motor, leads etc.) that are used have been supplied by us.