3500/50-01-00 Supply 4-Channel Displacement Monitor BENTLY Module

Description

3500/50-01-00 value is bypassed or defeated (For example when a problem occurs with the

transducer). The selected value can be between the minimum and maximum

full-scale range values. Only the values available from the Recorder Outputs,

Communication Gateway and Display 3500/50-01-00 Interface Module are clamped to the

specified value when the proportional value is invalid.

Recorder Output

3500/50-01-00 The proportional value of a channel that is sent to the 4 to 20 mA recorder.

The recorder output is proportional to the measured value over the channel

full-scale range. An increase in the proportional value that would be

indicated as upscale on a bar graph display results in an increase in the

current at the recorder output. If the channel is Bypassed, the output will be

clamped to the selected clamp value or to 2 mA (if the 2 mA clamp is

selected).

3500/50-01-00 The time which a proportional value must remain at or above an over alarm level

or below an under alarm level before an alarm is declared as active.

Alert

First level alarm that occurs when the transducer signal level exceeds the

selected Alert/Alarm 1 setpoint. This setpoint can be set on the Setpoint

screen. The Alert time 3500/50-01-00 delay is always set at one second intervals (from 1 to

60) for all available proportional values.

Danger

Second level alarm that occurs when the transducer signal level exceeds the

selected Danger/Alarm 2 setpoint. This setpoint can be set on the Setpoint

screen.

100 ms option

3500/50-01-00 The 100 ms (typical) option applies to the Danger time delay only and has

the following results:

– If the 100 ms option is off ():

– The Danger time delay can be set at one second intervals (from 1 to

60).

– The Danger time delay can be set for any two available proportional

values.

If the 100 ms option is on (
):

– The Danger time delay is set to 100 ms.

– The Danger time delay can only be set for the primary proportional

value.

3500/50-01-00 Direct Channel Above 600 RPM

Disabled

Display and alarming of the Direct proportional value will be disabled when

the shaft rotative speed exceeds 600 rpm.

Enabled

Display and alarming of the Direct proportional value will remain active when

shaft rotative speed exceeds 600 rpm.

Zero Position (Direct)

Represents the transducer DC voltage corresponding to the zero indication on

the channel’s meter scale for the direct proportional value. The amount of

adjustment allowed is dependent upon the Direct Full Scale Range and the

transducer OK limits. To ensure maximum amount of zero adjustment, gap the

probe as close as possible to the center gap voltage specified in the OK Limit

table.

Adjust Button

Adjust the Zero Position voltage. When this button is clicked a utility starts that

helps you set the direct zero position voltage. Since this utility provides active

feedback from the 3500 rack, a connection with the rack is required. Refer to

Section 5.2 (Adjusting the Scale Factor and the Zero Position)

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen