Bently Nevada 135813-01 External power supply/wiring board

Description

The 3500/93 System Display is configured using 3500
Rack Configuration Software. The display can be mounted
in any of four ways:
1. Face Mounting – display installs directly over the
front panel of any full size 3500 rack using a
special hinged support. This permits access to
the rack’s buffered output connectors and userinterface buttons and switches without
disconnecting or disabling the display.
Note: For this mounting option only, the Display
Interface Module (DIM) must be installed in slot 15
(right-most slot) of the rack. The Face Mounting
option is not compatible with the 3500 Mini-rack.
2. 19-inch EIA Rack Mounting – display is mounted
on 19-inch EIA rails and located up to 100 feet
away from the 3500 System. (Up to 4000 feet
away from the 3500 System when using the
External Power Supply).
3. Panel Mounting – display is mounted in a panel
cutout located in the same cabinet or up to 100
feet away from the 3500 System. (Up to 4000 feet
away from the 3500 System when using the
External Power Supply).
4. Independent Mounting – display is mounted
flush against a wall or panel and located up to 100
feet away from the 3500 System. (Up to 4000 feet
away from the 3500 System when using the
External Power Supply).
Up to two displays can be connected to each 3500 rack
and each display requires one empty 3500 rack slot for
insertion of its corresponding DIM. When the display is not
face-mounted, the cable connection between the DIM and
the Display can be made from the front of the 3500 rack or
from the I/O module at the rear of the rack.
Applications that require a cable longer than 100 feet must
use the External Power Supply and Cable Adapter.
Applications that use the back lighted Display Unit must
use the External Power Supply. There are two External
Power Supplies: one for connection to 115 Vac and the
other for connection to 230 Vac.
The External Power/Terminal Strip Mounting Kit eases
installation of External Power Supplies. The External
Power/Terminal Strip Mounting Kit is designed to fit in the
Independent Mount Housing. The Kit streamlines
installation of an External Power Supply in both the
Independent Mount Housing or a user supplied housing

Display Interface Module
OK LED: Indicates when the Display
Interface Module is operating
properly.
TX/RX LED: Indicates when the Display
Interface Module is communicating
with other modules in the 3500
rack.
Display Unit
Unit OK LED: Indicates when the Display Unit is
operating properly.
Rack OK LED: Indicates rack is in OK status, all
channels are OK.
Rack Alert LED: Indicates rack is in Alert status, at
least one channel is in Alert.
Rack Danger LED: Indicates rack is in Danger status,
at least one channel is in Danger.
OK LED (8): Indicates displayed channel(s)
above the LED is in OK status.
Alert LED (8): Indicates displayed channel(s)
above the LED is in Alert status.
Danger LED (8): Indicates displayed channel(s)
above the LED is in Danger status.
New Alarm LED: Indicates new alarm has been
detected since the last
acknowledgment.
Reflective 640 x
200 Dots LCD:
Displays data in graphical and text
format. LCD module is reflective
FSTN dot matrix type without
backlight. Ambient white light is
required for acceptable visibility.
Best visibility is under indirect
sunlight conditions, LCD visibility
decreases with corresponding
decrease in ambient light level.
LCD exhibits acceptable visibility
under normal office lighting levels.
Transflective
640×200 Dots LCD:
Displays data in graphical and text
format. LCD module is
transflective FSTN dot matrix type
with white electroluminescent
backlight.
Communication between the Display Unit and the Display
Interface Module
Hardware: RS422 Interface.
Protocol: Supports Bently Nevada
proprietary protocol and Modbus®
protocol based on AEG PI-MBUS300 Rev. E Reference Manual

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact Us:+86 18106937731
Whatapp:+86 15359293870
Email: geabbdcs@gmail.com / 2872270648@qq.com
Contact Person: Chen

135785-01 3500/93 Display Unit, non backlighted
135785-02 3500/93 Display Unit, back-lighted
137412-01 3500/93 Manual
135799-01 3500/93 Display Interface Module
135799-02 3500/93 Display Interface Module
(use with A05 option only)
135813-01 3500/93 Display Interface I/O
Module
136634-0010-01 10 Foot (3 metres) Cable (PVC)
136634-0050-01 50 Foot (15 metres) Cable (PVC)
136634-0050-02 50 Foot (15 metres) Cable
(Teflon? )
136634-0100-01 100 Foot (30 metres) Cable (PVC)
136634-0100-02 100 Foot (30 metres) Cable
(Teflon? )
130121-02-01 500 Foot (152 metres) Extension
Cable (PVC)
130121-02-02 500 Foot (152 metres) Extension
Cable (Teflon? )
02200271 External Power Supply for 115 Vac
02200272 External Power Supply for 230 Vac
138227-01 Cable Adapter
146085-01 Power Cable
137224-01 System Mounting Assembly
(sheet metal for A01 & A05
options)
04309007 4-40 X 0.63 Phillips head screw for
System Mounting Assembly, 4 are
required