EMERSON industrial control spare parts 1C31166G01 1C31169G01 serial link controller

Description

This 1C31166G01 bit indicates the point fault status of the module. It is the logical

“OR” of the eight individual point-quality status bits, plus the bits 1, 4,

7, and 13 of this register. A “0” indicates that all eight points have good

quality and no module error exists. When bits 1, 4, 7 or 13 of the Status

Register are not set, this bit (when set to “1”) indicates that at least one

of the points has bad quality. A subsequent read of the 1C31166G01 Point Quality

Register (Address 12, C in Hex) will reveal the point(s) that have bad

quality. The Address 12 (C in Hex) Point Quality Register contains data

only when the module fault is due to a bad point quality.

This bit configures the module (write) or indicates the configuration

state of the module (read). A “1” indicates that the module is configured.

Note that until the module is configured, 1C31166G01 reading from addresses 0

through 11 (B in Hex) will produce an attention status.

Bit 1: This bit (write “1”) forces the module into the error state, resulting in the

error LED being lit. The read of bit “1” indicates that there is an internal

module error, or the Controller has forced the module into the error

state. The state of this bit is always reflected by the module’s Internal

Error LED. Whenever this bit is set, an attention status is returned to the

Controller when addresses 0 through 11 (B in Hex) are read.

Bits 2-3: These bits are not used and are read as “0” under normal operation.

Bit 4: This bit (read) indicates that the module is in the “Warming” state. This

state exists after power up and terminates after 8.16 seconds. The mod

ule will be in the error condition during the warm up period.

Bits 5-6: These bits are not used and are read as “0” under normal operation.

This bit (read) is the result of a checksum test of the EEPROM. A failure

of this test can indicate a bad EEPROM, but it typically indicates that

the module has not been calibrated. A “0” indicates that there is no error

condition. 1C31166G01 If an error is present, the module error LED is lit. The point

fault bit will also be set since all the point data is not calibrated. The “1”

state of this bit indicates an unrecoverable error condition in the field.

Bit 8: The status of this bit (read) indicates the conversion rate of the module,

write to this bit configures the conversion rate of A/D converters as

shown below.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen