FOXBORO CP60 P0961FR communication card

Description

Generally, PLCs have LED indicator lights to help check if the fault is caused by external devices. Whether in simulation debugging or practical applications, if a certain circuit of the system cannot operate as required, the first step is to check whether the electrical contact point of the PLC input switch is reliable (usually by checking the input LED indicator light or directly measuring the input end). If the input signal cannot be transmitted to the PLC, the corresponding external circuit of the input should be checked; If the input signal has been collected, then check if the PLC has corresponding output indicators. If not, it is an internal program problem or an output LED indicator light problem; If the output signal is confirmed to be sent, the external output circuit should be checked (from the PLC output to the back).

In the output circuit, if the PLC output point is stuck internally due to a short circuit or other reasons, simply switch its wiring to another reserved empty wiring point and modify the corresponding program to change the original output label to a new address number.

Although PLC is suitable for industrial sites, attention should also be paid to avoiding direct vibration and impact, direct sunlight, oil mist, rain, etc. during use; Do not apply near corrosive gases, excessive dust, or heating elements; Avoid conductive debris entering the controller.

Related recommendations:
FPS400-24
FBM214
E69F-BI2
FBM211
FCM100ET
FBM218
FBM214B P0927AH
E69F-B12
873RS-BIYFGZ
RH924YF
P0926HW
CP60
CP60 P0961FR