GE IS200EXHSG1ACB high-speed static exciter terminal board

Description

GE General Electric Technical Specifications: IS200EXHSG1ACB

The 2 Amp Relay Output module for the Series 90-30 Programmable Logic Controller

provides 16 normally-open relay circuits for controlling output loads provided by the user. The

output switching capacity of each output is 2 amps. The output points are arranged in four

groups of four points each. Each group has a common power output terminal. The relay

outputs can control a wide range of user-supplied load devices, such as: motor starters,

solenoids, and indicators. Power for the internal relay circuits is IS200EXHSG1ACB provided by the +24 volt DC

bus on the backplane. The user must supply the AC or DC power to operate field devices.

There are no fuses on this module.

LED indicators which provide the ON/OFF status of each point are located at the top of the

module. The LEDs are arranged in two horizontal rows with eight green LEDs in each row; the top

row labeled A1 through 8 (points 1 through 8) and the bottom row labeled B1 through 8 (points 9

through 16). An insert goes between the inside IS200EXHSG1ACB and outside surface of the hinged door. The surface

towards the inside of the module (when the hinged door is closed) has circuit wiring information,

and circuit identification information can be recorded on the outside surface. The outside left edge

of the insert is color-coded red to indicate a high-voltage module. This module can be installed in

any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.

The 12/24 volt DC Negative Logic Output module for the Series 90-30 Programmable Logic

Controller provides 32 output points in four IS200EXHSG1ACB groups of eight with two common pins for each

group. The Output module is designed to have negative logic characteristics in that it sinks

current from the loads to the user common or negative power bus. The output device is

connected between the positive power bus and the module output. The output characteristics

are compatible with a wide range of user-supplied load devices, such as motor starters,

solenoids, and indicators. Power to operate the field devices must be supplied by the user.

Connections from the output circuits are made to the user’s output devices through a 50-pin

connector mounted on the front of the module.

This module does not have LED indicators to indicate circuit status. This output module can

be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC system.

Wiring to Field Devices

Direct Method – This method uses cables that have a mating female connector on the

module end and stripped and tinned wires on the other end. You can purchase a pre-wired

cable, either catalog number IC693CBL308 (3 feet/1 meter) or catalog number

IC693CBL309 (6 feet/2 meters) or, if required for your application, build your own cables.

Refer to the IC693CBL308/309 data sheet in Appendix C of this manual for cable

information.

Using a Weidmuller Terminal Block – You may purchase a Weidmuller #912263 terminal

block from your electronics dealer to use with a GE Fanuc prewired cable. GE Fanuc

Cables IC693CBL306 (3 feet/1meter) or IC693CBL307 (6 feet/2 meters) have connectors

on each end. These connect from the module connector to a connector on the DIN–rail

mounted Weidmuller terminal block. Appendix C has a data sheet for these cables, which

includes a figure showing how they connect between the module and the Weidmuller

terminal block.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen