GE IS200EXIBG1AEB MARK VI BOARD

Description

GE General Electric Technical Specifications: IS200EXIBG1AEB

terminal connector for each channel, which may be used to connect the internal 250 ohm shunt

resistor into the circuit. The shunt resistor IS200EXIBG1AEB effectively provides a –40 to +40 mA current input

range. However, the input current should generally not exceed ±20 mA, to avoid self-heating

of the input resistor and a corresponding loss of accuracy. A 4 to 20 mA input corresponds to a

1 to 5 volt input to the voltage input module; therefore, the resolution of the 4 to 20 mA input

signal is approximately 10 bits binary (1 part in 1024). The resolution can be increased to

approximately 11 bits (1 part in 2048) by IS200EXIBG1AEB using a precision 250 ohm resistor in place of the

jumper. The resistor causes the voltage input module to see a 4 to 20 mA input as 2 to 10 volts.

The main power source for the module is derived from the isolated +24 VDC power supplied

by the PLC power supply. This voltage is routed through an inverter/regulator to produce the

operating voltages for the module. This module also consumes 27 mA from the +5 VDC

output of the PLC power supply. An LED at the top of the module’s faceplate is ON when the

module’s power supply is operating. The module provides electrical isolation of externally

generated noise between the field wiring and the backplane through optical isolation.

To minimize the capacitive loading IS200EXIBG1AEB and noise, all field connections to the module should be

wired using a good grade of twisted, shielded instrumentation cable. The shields can be

connected to either COM or GND. The COM connection provides access to the common of the

analog circuitry in the module. The GND connection provides access to the baseplate (frame

ground).

This module can be installed in any I/O slot of a 5 or 10-slot baseplate in a Series 90-30 PLC

system. See page 3-11 to determine the number of Analog Voltage Input modules that can be

installed in a system.

The 4-Channel Analog Current Input module for the Series 90-30 Programmable Logic

Controller provides four input channels, each capable of converting an analog input signal to a

digital signal for use as required by your application. This module provides two input ranges.

The default range is 4 to 20 mA with user data scaled so that 4 mA corresponds to a count of 0

and 20 mA corresponds to a count of 32000 with each 1000 counts representing 0.5 mA. When

a jumper is added to the I/O terminal board, the input range is changed to 0 to 20 mA with user

data scaled so that 0 mA corresponds to a count of 0 and 20 mA corresponds to a count of

32000 with each 800 counts representing 0.5 mA. Two range jumpers are provided with the

module; one for channels one and two, and the other for channels three and four.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen