GE IS200FHVBG1A high-voltage grid interface board

Description

GE General Electric Technical Specifications: IS200FHVBG1A

The Analog Current/Voltage Combination Input/Output module provides up to 4 differential

input current or voltage channels and 2 single-ended output channels with either current loop

outputs or voltage outputs. Each channel can be individually IS200FHVBG1A configured for the current or

voltage range, as applicable, required for your application. All module configuration is done

through software, except for a jumper required IS200FHVBG1A for selecting the current input mode. All ranges

can be configured using either the Logicmaster 90-30/20/Micro programming software

configurator function or the Series 90-30 Hand-Held Programmer.

Note that in this module’s description, the module will be simply referred to as the Analog Combo

Module.

Each analog input is capable of providing five input ranges (two voltage and three current),

which are:

0 to +10 volts (unipolar) – default range IS200FHVBG1A for both input and output channels.

–10 to +10 volts (bipolar)

0 to 20 mA

4 to 20 mA

4 to 20 mA Enhanced

The default input range is voltage mode 0 to +10 volts (unipolar) with user data scaled so that

0V corresponds to a count of 0 and 10V corresponds to a count of 32767.

Each analog output is capable of providing four output ranges (two voltage and two current):

0 to +10 volts (unipolar) – default range for both input and output channels.

–10 to +10 volts (bipolar)

0 to 20 milliamps

4 to 20 milliamps

Each output channel is capable of converting 15 to 16 bits (depending on the range selected) of

binary (digital) data to an analog output for use as required by your application. User data in

the%AI and %AQ registers is in a 16-bit 2’s complement format. In current modes, an open-wire

fault is reported to the CPU for IS200FHVBG1A each channel. The module can go to a known last state when

system power is interrupted. As long as user power is applied to the module, each output will

maintain its last value, or reset to the low end of the scale (range), as determined by how you have

configured the module.

Each output channel can be configured to operate in ramp mode using ladder logic. In ramp

mode, changes in %AQ data cause the corresponding output channel to ramp to the new %AQ

value. The ramp output consists of steps taken each millisecond until the final value is reached.

High and low alarm limits can be set for all input channels and an open-wire fault (current

output modes) is reported to the CPU for each output channel. All six analog channels may be

updated on every scan, depending on the scan time.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

The maximum number of 8-Channel Analog Current/Voltage Output modules that can be installed

in a system are:

4 in a system using CPU Models 311, 313, or 323

8 in a system using CPU Model 331

32 in a system using CPU Models 340 and 341

64 in a system using CPU Models 350 – 364

Other Configuration Considerations

When planning the module configuration for your application you must also consider the load

capacity of the installed power supply and the total load requirements of all modules that are

installed in the baseplate.

Refer to Chapter 1 in this manual for details on power supply, baseplate, and module load

requirements. The following table lists the specifications for this module. Note that test conditions,

unless otherwise noted, are: VUSER = 24 VDC at an ambient temperature of 25 C (77 F)

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen