GE IS200GFOIH1B optical fiber ground plate

Description

GE General Electric Technical Specifications: IS200GFOIH1B

When a IS200GFOIH1B discrete input device closes, the corresponding input LED should light to indicate that

the signal reached the module. If the light does not turn ON, a voltage check can be made on

the module’s terminal board or block:

If the correct voltage is present at the terminal, the corresponding input bit can be

checked in the PLC with your programming software. If the software shows that the

input bit is at logic 1, the module’s LED circuit is defective.

If the correct voltage level is not present at the terminal, a check can be made at the

input field device to determine if the device or interconnecting wiring is defective.

If none of an input module’s inputs are working, it may be that the external (field) input power

supply is defective, is not powered up, or is not connected properly. (As indicated in the

connections diagram in the previous figure, input and output devices are powered from an

external power supply, not from inside the module). Input modules are not fused, so the Fuse

Indicator LED in the previous picture does not apply to them.

When a discrete output address (%Q) is turned on in the ladder program, the corresponding

output LED should light to indicate that the signal reached the module.

If the LED does not turn ON, the module may be defective or the LED light may be bad.

Also, make sure that the module is configured correctly (is the correct type, and its

assigned memory addresses are correct).

If the LED IS200GFOIH1B turns on but the output device (relay, solenoid, etc.) doesn’t operate, a voltage

check can be made on the module’s terminal board or terminal block, if using one. If the

LED turns on but the module doesn’t switch the output voltage:

1. A fuse could be open, if it is a fused module. Check the red “F” LED at the top of

the module. If it is on, a fuse is open. If a fuse is open, you probably have a

shorted field device or wiring. Note: Output LEDs can be on even if a fuse is

open.

2. The Electronic Short Circuit Protection (ESCP) circuit may be tripped, if the

module has this feature. If the red “F” LED at the top of the module is on, the

ESDC circuit is tripped. If tripped, you probably have a shorted field device or

wiring. Note: Output LEDs can be on even if the ESDC is tripped. Turn off

system power and find and correct the short. The ESCP circuit resets when the

PLC is power–cycled.

3. The external field device power supply supplying the output voltage may be

defective, turned off, disconnected, have an open fuse, tripped circuit breaker, etc.

Note: Output LEDs can be on even if the field power supply is not working.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

The maximum number of 8-Channel Analog Current/Voltage Output modules that can be installed

in a system are:

4 in a system using CPU Models 311, 313, or 323

8 in a system using CPU Model 331

32 in a system using CPU Models 340 and 341

64 in a system using CPU Models 350 – 364

Other Configuration Considerations

When planning the module configuration for your application you must also consider the load

capacity of the installed power supply and the total load requirements of all modules that are

installed in the baseplate.

Refer to Chapter 1 in this manual for details on power supply, baseplate, and module load

requirements. The following table lists the specifications for this module. Note that test conditions,

unless otherwise noted, are: VUSER = 24 VDC at an ambient temperature of 25 C (77 F)

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen