GE IS200HFPAG1ADB Speedtronic turbine control board

Description

GE General Electric Technical Specifications: IS200HFPAG1ADB

This 10’ (3 meter0 prewired cable was used with all Series 90-30 high-density (32 point) I/O

modules that use the Fujitsu 24-pin user I/O connector. Each of these modules has two of these

connectors mounted side-by-side. I/O Interface cables have a 24-pin female connector on one end

for connection to the module, and stripped and tinned wires on the other end. Catalog numbers for

32 point modules having two 24-pin connectors are: IC693MDL654, IC693MDL655,

IC693MDL752, and IS200HFPAG1ADB.

Connections to module input circuits are made from the user’s input devices to two male (pin-type)

24-pin connectors (Fujitsu FCN-365P024-AU) mounted on the front of the module. The connector

mounted on the right of the module (front view) interfaces with groups A and B; the connector on

the left side of the module interfaces with groups C and D. If a different length cable is required

for connections to these modules, you can build your own cable (information on building your own

cable is found in the data sheet for cable IS200HFPAG1ADB).

Replacement/Obsolescence Information

This cable became obsolete and was replaced by cable IC693CBL315 (now obsolete also).

The only difference between these two cables is in the wire color coding.

When cable IS200HFPAG1ADB became obsolete, the replacement for these cables became

IC693CBL327 and IC693CBL328. Cables IS200HFPAG1ADB have straight connectors.

Cables IC693CBL327/328 have right angle connectors. The right angle connectors require

less depth in front of the PLC, so allow the use of a smaller enclosure in some applications.

Data sheets for cables IC693CBL315 and IC693CBL327/328 can be found in this chapter

The following illustration shows the space required in front of the PLC when this cable is

connected to a module. The depth of the cabinet that the PLC is mounted in should allow for

the depth added by this connector.

This prewired cable is available for use with all Series 90-30 high-density (32 point) I/O modules

that use the Fujitsu 24-pin user I/O connector. Each of these modules has two of these connectors

mounted side-by-side. I/O Interface cables have a 24-pin connector on one end for connection to

the module, and stripped and tinned wires on the other end. Catalog numbers for 32 point modules

having two 24-pin connectors are: IC693MDL654, IC693MDL655, IC693MDL752, and

IC693MDL753.

Connections to input circuits are made from the user’s input devices to two male (pin-type) 24-pin

connectors (Fujitsu FCN-365P024-AU) mounted on the front of the module. The connector

mounted on the right of the module (front view) interfaces with groups A and B; the connector on

the left side of the module IS200HFPAG1ADB interfaces with groups C and D. If a different length cable is required

for connections to these modules, you can build your own cable.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

The maximum number of 8-Channel Analog Current/Voltage Output modules that can be installed

in a system are:

4 in a system using CPU Models 311, 313, or 323

8 in a system using CPU Model 331

32 in a system using CPU Models 340 and 341

64 in a system using CPU Models 350 – 364

Other Configuration Considerations

When planning the module configuration for your application you must also consider the load

capacity of the installed power supply and the total load requirements of all modules that are

installed in the baseplate.

Refer to Chapter 1 in this manual for details on power supply, baseplate, and module load

requirements. The following table lists the specifications for this module. Note that test conditions,

unless otherwise noted, are: VUSER = 24 VDC at an ambient temperature of 25 C (77 F)

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen