GE IS200ICCAH1A MARK VI INNOVATION DRIVE CONTROL

Description

GE General Electric Technical Specifications: IS200ICCAH1A

The 489 has dual settings for the current, voltage, power, RTD, and thermal model protection elements (S5 to S9). These

setpoints are organized in two groups: the IS200ICCAH1A main group (Group 1) and the alternate group (Group 2). Only one group of set

tings is active in the protection scheme at a time. The active group can be selected using the ACTIVATE SETPOINT GROUP

setpoint or an assigned digital input in S3 Digital Inputs. The LED indicator on the faceplate of the 489 will indicate when

the alternate setpoints are active in the protection scheme. Independently, the setpoints in either group can be viewed and/

or edited using the EDIT SETPOINT GROUP setpoint. Headers for each setpoint message subgroup that has dual settings will

be denoted by a superscript number indicating which setpoint IS200ICCAH1A group is being viewed or edited. Also, when a setpoint that

has dual settings is stored, the flash message that appears will indicate which setpoint group setting has been changed.

If only one setting group is required, edit and activate only Group 1 (that is, do not assign a digital input to Dual Setpoints,

and do not alter the ACTIVATE SETPOINT GROUP setpoint or EDIT SETPOINT GROUP setpoint in S3 DIGITAL INPUTS).

A passcode access security feature is IS200ICCAH1A provided with the 489. The passcode is defaulted to “0” (without the quotes) at the

time of shipping. Passcode protection is ignored when the passcode is “0”. In this case, the setpoint access jumper is the

only protection when programming setpoints from the front panel keypad and setpoints may be altered using the RS232

and RS485 serial ports without access protection. If however, the passcode is changed to a non-zero value, passcode pro

tection is enabled. The access jumper must be installed and the passcode must be entered, to program setpoints from the

front panel keypad. The passcode must also be entered individually from each serial communications port to gain setpoint

programming access from that port.

To enable passcode protection on a new relay, follow the procedure below:

1. Press then until the

CHANGE PASSCODE message is displayed.

2. Select “Yes” and follow directions to enter a new passcode 1 to 8 digits in length.
3. Once a new passcode (other than 0) is programmed, it must be entered to gain setpoint access whenever setpoint

access is restricted. Assuming that a non-zero passcode has been programmed and setpoint access is restricted, then

selecting the passcode subgroup causes the ENTER PASSCODE AGAIN message to appear.

4. Enter the correct passcode. A flash message will advise if the code IS200ICCAH1A is incorrect and allow a retry. If it is correct and the

setpoint access jumper is installed, the SETPOINT ACCESS: Permitted message appears.

5. Setpoints can now be entered. Exit the passcode message with the key and program the appropriate setpoints.

If no keypress occurs for 5 minutes, access will be disabled and the passcode must be re-entered. Removing the set

point access jumper or setting SETPOINT ACCESS to “Restricted” also disables setpoint access immediately.

If a new passcode is required, gain setpoint access by entering the current valid passcode. Press to display the

CHANGE PASSCODE message and follow the directions. If an invalid passcode is entered, the encrypted passcode is view

able by pressing . Consult GE Power Management with this number if the currently programmed passcode is

unknown. The passcode can be determined with deciphering software.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

The maximum number of 8-Channel Analog Current/Voltage Output modules that can be installed

in a system are:

4 in a system using CPU Models 311, 313, or 323

8 in a system using CPU Model 331

32 in a system using CPU Models 340 and 341

64 in a system using CPU Models 350 – 364

Other Configuration Considerations

When planning the module configuration for your application you must also consider the load

capacity of the installed power supply and the total load requirements of all modules that are

installed in the baseplate.

Refer to Chapter 1 in this manual for details on power supply, baseplate, and module load

requirements. The following table lists the specifications for this module. Note that test conditions,

unless otherwise noted, are: VUSER = 24 VDC at an ambient temperature of 25 C (77 F)

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen