IS200TBAIH1C BOARD ANALOG GE MARK VI

Description

GE General Electric Technical Specifications: IS200TBAIH1C

This IS200TBAIH1C system may be mounted in a 19-inch RETMA rack, or

mounted to a wall or other vertical surface. AC input power

is brought into the enclosure from the left. Input and output

connectors for signals and de power leave the box from the

right side panel. Thesl:! may then be routed to the external

loads. The input ac power may beclerived from the power

cord assembly, or the cord ,may be removed and % inch

conduit cable may be used to install the power connections.

permanently.

Wall Mounting

IS200TBAIH1C Two mounting support brackets are bolted to the rear sides

ofthe enclosure with ten (1 0) #8-32 bolts and lock washers

as shown in Figure 2. The top and bottom of the enclosure

may be used as mounting points if desired (see Figure 3).

The complete assembly of enclosure and brackets may then

be mounted using bolts or screws to a flat surface. This

enclosure requires at least a 14-inch by 19-inct) flat surface

for .proper mounting.

A terminal block (TB2) is provided for distribution of logic

IS200TBAIH1C ground and +5-volt power to external devices. The user is

cautioned to check total loading on the power supply when

powering external devices. Do not locate external devices

more than 50 ft. from ENCL. The terminal block (TB2) will

accept wire sizes AWG #22 to #14. It is recommended that

AWG #14 (wire) be used to minimize IR drop in cabling to

the external loads. An access hole, one and one-half (1 Y2)

inch in diameter, is provided for routing wire to the external

devices. Separate VCC (+5 volt) and ground wires should be

used to power each load device to minimize load crosstalk

and IR drop. The terminal block will accept spade lugs, ring

lugs, or bare wire terminations.

Power-Fail Detect (MDX-PFD)

The Power-Fail Detect modules (MK77979) may be

installed in this enclosure and has to be ordered separately

and installed by the user. The ac voltage transformer board

and cover mounts on the four (4) #6-32 female studs on the

rear surface of the enclosure. The MDX-PFD board plugs

into the card cage and is connected to the transformer via a

2-wire cable. The 1151230 volt ac is routed to the

transformer via the ac input terminal strip TB1 located on

the left side wall of the enclosure. See PFD Technical

Manual for connection of the ac input to the ac transformer

board. The connection is dependent on the line voltage.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the de

livery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen