Sale!

HIMA H 4135A Power voltage output module

¥600.00

Product name:HIMA H 4135A Power voltage output module

Product model:HIMA H 4135A

The H 4135A safety related output module has three series switched semiconductors. This means that a second independent component is now integrated in the output module that exceeds the requirement for safe shutdown.

40 in stock

Category: SKU: HIMA H 4135A
Whatsapp：+86 15359293870
WeChat：+86 18106937731
                E-mail：geabbdcs@gmail.com
Contacts：kelly CHEN

Description

The H 4135A current (Ex)i modules exist in 2 construction models:

– non-varnished with PCB covering

– varnished with PCB covering

 

Any models can be equipped together without free slots between.

 

Non varnished (Ex)i modules may combined together with non-(Ex)i modules without any restrictions. Also no free slots are necessary on the left or on the right.

With varnished (Ex)i modules with PCB covering the right slot has to remain free in combination with non-(Ex)i modulels or has to be equipped with with a faceplate with partition plate M 2214. This is also valid for slot 15. The slot left to the (Ex)i module may be equipped with any other module. Spare slots are to be covered by faceplates M 2215 (4 units) or M 2217 (8 units).

 

brand Product Name Product model Order No
HIMA modular HIMA H 4135A nothing
Place of Origin Marketable land Imported or not defects liability period
Europe and America Nationwide and overseas yes a year
Place of shipment Delivery method How to use Applicable industries
Xiamen Shunfeng Express Commissioning and installation Power Plant Steel Plant Cement Plant Shipboard Papermaking
Service advantages Foreign import, goods preparation and supply Reasonable price and reliable quality Pictures are for reference only
Product features Primary source of goods, supply by model After sales guarantee Chen 1810693-7731

 

All output modules H 4135A have the following special features:

– To increase the availability the outputs of the safety related output modules can be switched in parallel without external diodes

– No output voltage occurs when the supply voltage L- should be cut on the output module, so it is not necessary to wire the L- as a ring feeder

– The connection of inductive loads can be done without using diodes at the coil. However it is recommended to connect a diode directly at the inductive load avoiding noise voltages.

– The LED signalling the output status is controlled separately

– The design of the cable plugs enables the two pole connection of the actuators. Together with a two pole supply of the output module an earth fault detection will be simplified

– No time limit for operation in case of a defective output module.

 

Related products