HIMA system X-FAN 18 03 analog input original card

Description

X-FAN 18 03 Aside from XMR architecture, online expandability is the next

major factor in nonstop operation.

With HIMax, application programs and hardware can be

changed while operation continues, at any time. The update

is then written to a second memory area, after which the

system switches seamlessly to the update. This method of

intelligent memory management X-FAN 18 03 ensures that the control

ler is always operational regardless of whether it is mono or

redundant. There is no limit to the number of times a program

can be reloaded during operation. Even operating systems

can be updated during operation.

X-FAN 18 03 I/O modules, their associated connector boards, base plates

and remote components can also be added during operation.

The same applies to new base plates and remote components.

All can be modififi ed without having to stop the plant.

Online expandability of hardware and software guarantees

maximum flfl exibility during the entire life cycle.

X-FAN 18 03 Self-education

Automatically updated

If the system diagnoses an internal fault, the module involved

can be replaced quickly during operation. Only a few moves

are required.

If a processor module is swapped, X-FAN 18 03 the new module is auto

matically brought up to date with the currently operative

modules. The parameter setting and the user program are

imported from the functional processor module and then

loaded.

“Self-education” has other benefifi ts for the user:

– Your inventory of spare parts will be smaller

– You do not have to search for correct software versions

– When replacing a processor module, you do not have to

connect a computer, which eliminates subsequent potential

fault causes.

Version 3, Subje

X-FAN 18 03 According to IEC 61508 and IEC 61511, every safety system

must be subjected to a proof test at regular intervals. A proof

test is designed to reveal any faults, so the system can be

restored and fulfifi l its intended function.

The proof test interval for HIMax’s semiconductor modules

is 10 years. In the relay modules, the current and number of

switching cycles are measured in order to test the status of

the relay. This means that, depending on the load of the relay,

the relay module can continue to be operated after the proof

test and does not have to be replaced.

A HIMax controller can be subjected to a proof test by testing

the entire safety circuit. In practice, a shorter testing interval

(6-12 months) is required for the fifi eld unit’s inputs and out

puts than for the HIMax controller (10 years). If the user tests

the entire safety circuit on the fifi eld unit schedule, then the

HIMax controller is automatically included in that test. This

has been confifi rmed by TÜV.

Generally speaking, you can plan your proof tests accord

ing to your plant’s operational requirements. If the plant is

stopped anyway, then a complete proof test can be performed

on the HIMax by turning the controller on and back off again.

Transparent, fast diagnosis

Detailed information via LEDs and SILworX

HIMax tests its own functionality regularly, using self-diagno

sis. This diagnostic information can be observed on the mod

ules themselves via coloured LEDs that show the full range of

operating statuses. You can see at a glance whether redun

dant parts are available, whether the system bus is working

properly, whether an internal fault has been recognised in the

system and whether a fault exists in the fifi eld.

Because more than 90 % of all faults originate on the fifi eld

side, it is important to detect faults such as short circuits and

wiring breakages quickly. HIMax indicates the faulty channel,

saving you the time it would take to fifi nd the fault.

SILworX, the fully integrated engineering tool, can be used

to obtain more detailed information via its online diagnostic

features, which display operating statuses over time. You

can connect a computer running SILworX at any point in the

network, further speeding up the search for faults.

Why are the prices of many products of our company more competitive?
(1) Source purchase to reduce the price difference in the intermediate phase
(2) Stable channel and more guaranteed supply
Lead time problem
(1) For the spot products in stock, the delivery can be arranged on the same day after the contract payment is signed
(2) Order products and deliver according to the quoted delivery date
Xiamen Xiongba adheres to the enterprise philosophy of “improving the value of spare parts supply chain”,
For the simple purchase procedure of spare parts, ensure that they are delivered to the site in a timely manner, and help users reduce the risk of downtime caused by the shortage of spare parts
The emergency spare parts support service is complete, and the user can customize the spare parts. The quality of the spare parts is reliable. All the spare parts provided enjoy a one-year super long warranty
Spot stock, fast response, reduce user capital investment, improve spare parts utilization, spare parts replacement!

Details: If you need urgent delivery orders, please feel free to contact us, and we will try our best to meet your needs.
Price problem: If you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.
Contact us:+86 181 0693 7731
Mail: 2872270648@qq.com
Contact: Chen