i/o module HIEE401481R0001

SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
NOTES:
1. All specification values are maximums unless stated otherwise.
2. Repeaters are required to connect HN800 between stand-alone enclosures even if the distance between enclosures is short. In the case of multibay enclosures, HN800 can extend to
each bay without the use of repeaters as long as the 30 m (100 ft.) limit is not exceeded.
3. To be supplied by a Class 2 or Limited Energy Source in accordance with 61010-1 3rd edition. If the equipment is used in a manner not specified by the manufacturer, then the
protection provided by the equipment can be impaired.
4. Only TRL810K02 fiber optic TU kit is authorized to mount on vertical DIN-rail.
5. The RMU810 and RMU811 mounting bases do not consume any power on their own. These ratings are based on the amount of power that passes through these bases to the
RFO810 modules and to other adjacent bases and modules.
6. A Bus Segment is defined as the collection of HN800 devices physically connected between a pair of HBX01L & HBX01R Bus Extenders. The maximum 8 Bus Segments can only be
achieved when all HBX01L & HBX01R on the bus is PR: C or later, and all TER800 on the bus is PR: F or later. When any Bus Extender or Bus Terminator with earlier product revision
is used, the maximum number of Bus Segment per electrical HN800 bus is reduced to 3.
7. Intracabinet HN800/CW800 refers to HN800/CW800 enclosed within a stand-alone (or multibay) enclosure not leaving the protection of the enclosure. This distance includes
the length of all interconnected bases and all connecting cables.
8. Special operation dip switches are required on the HPC800 and BRC300/400 controllers to achieve the maximum distance. HPC800, BRC and HN800 devices firmware must also be
at a specific revision level (or later) to achieve the maximum distance. Refer to the HPC800 or BRC 300/400/410 user manual for details.
9. The absolute maximum difference in fiber optic cable length between HN800/CW800 Channel A and HN800/CW800 Channel B cables of a fiber optic HN800/CW800 segment is 20
meters (65.5 feet). The maximum length of a channel is 3,000 meters (9,842 feet).
10. Typical cable example: AMP Zip cord P/N 502983-1 (riser) or P/N 502986-1 (plenum).
11. Terminate the fiber optic cable with the appropriate ST connector according to the cable type (i.e.,jacket material, bend radius, pull strengths, etc.). ST connectors can be plastic,
steel, or ceramic ferrules. Typical connector example: AMP ST style, Epoxyless, P/N 504034-1 with right angle strain relief P/N 502667-6 (black).