IEMMU21 ABB distributed control system industrial DCS module card

Description

Packaging details: if you need an urgent delivery order, please feel free to contact us, and we will do our best to meet your needs.

Price problem: if you find that other suppliers offer cheaper prices for the same product, we are also willing to provide you with reference prices and give you further discounts.

Use the settings in the Fieldbus adapter submenu to use the drive with the following
fieldbus protocols, shown with the optional fieldbus adapter module required:
• BACnet/IP: FBIP-21 adapter
• CANopen: FCAN-01 adapter
• ControlNet: FCNA-01 adapter
• DeviceNet: FDNA-01 adapter
• EtherCAT: FECA-01 adapter
• Ethernet/IP: FEIP-21 adapter, FENA-21 adapter
• ETH Pwrlink (Ethernet Powerlink): FEPL-02 adapter
• ModbusTCP: FMBT-21 adapter, FENA-21 adapter
• PROFIBUS-DB: FBPA-01 adapter
• PROFINET IO: FPNO-21 adapter, FENA-21 adapter
• Ethernet/IP: FENA-21 adapter
Check the supported fieldbus modules with your ABB representative.
You can also configure all the fieldbus related settings via the parameters (parameter
groups 50 Fieldbus adapter (FBA), 51 FBA A settings, 52 FBA A data in, 53 FBA A
data out, 58 Embedded fieldbus, but the purpose of the Fieldbus adapter submenu
is to make the protocol configurations easier.
See also chapter Fieldbus control through a fieldbus adapter on page 345.
The table below provides detailed information about the available setting items in the
Fieldbus adapter submenu. Note that some of the items only became active once
you have enabled fieldbus.